Jerry Busse
Moderator
- Joined
- Aug 20, 1999
- Messages
- 11,992
SantaGanzaaaa 2012 Ordering Procedures, Pictures and Pricing:
The SantaGanzaaaa will be this coming Wednesday, December 19th between 9:00-10:00 pm Eastern Time. If the forums are shut down due to an overload in traffic, as has happened in past Extravaganzaaaas. . . I will continue to attempt posting the "Go" thread until I am able to get through on one of the 4 Busse Knife Group forums.
1) http://www.bladeforums.com/forums/forumdisplay.php/713-Busse-Combat-Knives
2) http://www.scrapyardknives.com/ubbthreads/postlist.php?Cat=0&Board=Knives
3) http://www.swampratknifeworks.com/ratchat/
4) http://www.bladeforums.com/forums/forumdisplay.php/778-Swamp-Rat-Knives
EMERGENCY BACK-UP Plan!!!!!. . . If the forum shuts down and I am unable to post, or you cannot get on to see whether or not the "GO" thread has been posted, we are implementing an emergency back-up plan that consists of an automatic "GO" at 9:55 pm Eastern! Your email can not be marked any earlier than 9:55 pm Eastern unless I am able to post the "GO" button before that time. . . . If the automatic "GO" is used, then ALL EMAILS MARKED 9:54 pm or earlier will be put at the end of the line!!!!. . . So, be careful not to jump the gun boys!!!
1) Some of the knives being offered are extremely limited in number. So, be sure to include second, third, and fourth choices in your email as the pieces you request might be sold out before you get your emails in!
2) We need to know the total number of knives you want to purchase. You must tell us HOW MANY of each knife you want from the list you send us. Or, you can simply include how much you want to spend. For example, you might list 5 knives and tell us that you do not want to exceed $3,000.00. Please list the knives in your order of priority.
3) You must include the knife's picture number (For example: 3, 5, etc. . . ) and pricing in your order.
4) You must include your Forum name and your REAL name and address as well as phone numbers and any other pertinent info that we may need in order to contact you for payment and shipping info.
5) Email both Lexi at lexi@bussecombat.com and Jerry at jerry@bussecombat.com AFTER the "GO" thread is posted by me on one of the Busse Knife Group Forums.
********WARNING!!! The INFI HOGs are a treacherous group and are not to be trusted!!! They will post under names that look similar to mine (Be sure that it says "Moderator" in red under my name if it is on Bladeforums) and will bring up MANY false threads from the past in order to get others to order BEFORE the actual Santa Ganzaaa GO THREAD!!!! DO NOT fall for this as so many have in the past and be left out in the cold.********
6) Orders are taken in the order in which we receive them.
**** Important Note: Those who intentionally overload their order request and then cancel most or part of their order AFTER notifications have been made, will lose their place and be put at the end of the line, where they may or may not get any of their requested knives. "Order loading" causes innumerable problems for our office. *******
Lexi, Pokey and the other girls will need a few days to sort this thing out. Do not expect any notifications to be sent out for at least 5 business days.
So, rev up your mouse and get ready for a wild one!!!
Good luck gang. . . . It looks like it's gonna be a Santa Ganzaaaa of Ho Ho HOG proportions!!!!
Let’s Drink! :thumbup:
Jerry
Nuclear Meltdown Fusion Steel Heart CG & DC Specs:
Blade Thickness: 5/16”
Overall Length: 15 1/2”
Blade Width: 2”
Blade Length: 9 1/2”
Grind: Full Height Flat
Edge: Blended Zero
Steel: INFI 58-60Rc
Combat Grade Blade Finish Options:
Black
Tanker Gray
Desert Sage
Jungle Green
Muddy Brown
Arctic White
Handle Options for both Combat Grade and Double Cut Versions
****Some Handle Options Are Limited. . .
****Please choose 3 handle options in your order of preference.
Black Canvas (Standard)
Tan Canvas (Standard)
Black Paper (Standard)
Tan/Black G10 +$85.00
Red/Black G10 +$85.00
Green/Black G10 +$85.00
Orange/Black G10 +$85.00
Yellow/Black G10 +85.00
Blue/Black G10 +85.00
NMFSH Combat Grade CG Regular Price: $427.00. . . Special Santa Ganzaaaa Price: $397.00 You save ($30.00)
NMFSH Double Cut DC Regular Price: $527.00 . . . Special Santa Ganzaaa Price: $477.00 (You Save $50.00!!!)
(1) NMFSH CG
(2) NMFSH DC
Scrapmax 460
Blade Length: 4.5”
Overall Length: 9”
Blade Width: 1”
Blade Thickness: .095”
Grind: Full Height Flat
Steel: Elmax
Handle: Resiprene C
Price: $89.95
(3) Scrapmax 460
Scrapmax 460 Trail Point
Blade Length: 4.5”
Overall Length: 9.1875”
Blade Width: 1”
Blade Thickness: .095”
Grind: Full Height Flat
Steel: Elmax
Handle: Resiprene C
Price: $89.95
(4) Scrapmax 460 Trail Point
SYKCO 311 (Tanker Gray Edition) Specs:
Blade Length: 3 1/2”
Overall Length: 8”
Blade Width: 1 1/4”
Blade Thickness: Approx 3/16”
Grind: Saber
Finish: Tanker Gray
Steel: SR101 58-60Rc
Handle: Resiprene C
Price: $69.95
(5) SYKCO 311
SYKCO 511 (Tanker Gray Edition) Specs:
Blade Length: 5 1/2”
Overall Length: 10”
Blade Width: 1 3/8”
Blade Thickness: Approx 3/16”
Grind: Saber
Finish: Tanker Gray
Steel: SR101 58-60Rc
Handle: Resiprene C
Price: $89.95
(6) SYKCO 511
SYKCO 711 (Tanker Gray Edition) Specs:
Blade Length: 7 3/8”
Overall Length: 12 1/2””
Blade Width: 1.65”
Blade Thickness: Approx 1/4”
Grind: Saber
Finish: Tanker Gray
Steel: SR101 58-60Rc
Handle: Resiprene C
Price: $139.95
(7) SYKCO 711
Swamp Rat Sterile Overrun Specs:
Blade Length: 6 3/8”
Overall Length: 11 3/4”
Blade Width: 1.60”
Blade Thickness: Approx. 1/4”
Grind: Saber
Finish: Desert Camo
Steel: SR101 58-60Rc
Handle: Tan Canvas
Price: $158.95
(8) Swamp Rat Sterile Overrun
.
The SantaGanzaaaa will be this coming Wednesday, December 19th between 9:00-10:00 pm Eastern Time. If the forums are shut down due to an overload in traffic, as has happened in past Extravaganzaaaas. . . I will continue to attempt posting the "Go" thread until I am able to get through on one of the 4 Busse Knife Group forums.
1) http://www.bladeforums.com/forums/forumdisplay.php/713-Busse-Combat-Knives
2) http://www.scrapyardknives.com/ubbthreads/postlist.php?Cat=0&Board=Knives
3) http://www.swampratknifeworks.com/ratchat/
4) http://www.bladeforums.com/forums/forumdisplay.php/778-Swamp-Rat-Knives
EMERGENCY BACK-UP Plan!!!!!. . . If the forum shuts down and I am unable to post, or you cannot get on to see whether or not the "GO" thread has been posted, we are implementing an emergency back-up plan that consists of an automatic "GO" at 9:55 pm Eastern! Your email can not be marked any earlier than 9:55 pm Eastern unless I am able to post the "GO" button before that time. . . . If the automatic "GO" is used, then ALL EMAILS MARKED 9:54 pm or earlier will be put at the end of the line!!!!. . . So, be careful not to jump the gun boys!!!
1) Some of the knives being offered are extremely limited in number. So, be sure to include second, third, and fourth choices in your email as the pieces you request might be sold out before you get your emails in!
2) We need to know the total number of knives you want to purchase. You must tell us HOW MANY of each knife you want from the list you send us. Or, you can simply include how much you want to spend. For example, you might list 5 knives and tell us that you do not want to exceed $3,000.00. Please list the knives in your order of priority.
3) You must include the knife's picture number (For example: 3, 5, etc. . . ) and pricing in your order.
4) You must include your Forum name and your REAL name and address as well as phone numbers and any other pertinent info that we may need in order to contact you for payment and shipping info.
5) Email both Lexi at lexi@bussecombat.com and Jerry at jerry@bussecombat.com AFTER the "GO" thread is posted by me on one of the Busse Knife Group Forums.
********WARNING!!! The INFI HOGs are a treacherous group and are not to be trusted!!! They will post under names that look similar to mine (Be sure that it says "Moderator" in red under my name if it is on Bladeforums) and will bring up MANY false threads from the past in order to get others to order BEFORE the actual Santa Ganzaaa GO THREAD!!!! DO NOT fall for this as so many have in the past and be left out in the cold.********
6) Orders are taken in the order in which we receive them.
**** Important Note: Those who intentionally overload their order request and then cancel most or part of their order AFTER notifications have been made, will lose their place and be put at the end of the line, where they may or may not get any of their requested knives. "Order loading" causes innumerable problems for our office. *******
Lexi, Pokey and the other girls will need a few days to sort this thing out. Do not expect any notifications to be sent out for at least 5 business days.
So, rev up your mouse and get ready for a wild one!!!
Good luck gang. . . . It looks like it's gonna be a Santa Ganzaaaa of Ho Ho HOG proportions!!!!
Let’s Drink! :thumbup:
Jerry
Specs & Pricing
Nuclear Meltdown Fusion Steel Heart CG & DC Specs:
Blade Thickness: 5/16”
Overall Length: 15 1/2”
Blade Width: 2”
Blade Length: 9 1/2”
Grind: Full Height Flat
Edge: Blended Zero
Steel: INFI 58-60Rc
Combat Grade Blade Finish Options:
Black
Tanker Gray
Desert Sage
Jungle Green
Muddy Brown
Arctic White
Handle Options for both Combat Grade and Double Cut Versions
****Some Handle Options Are Limited. . .
****Please choose 3 handle options in your order of preference.
Black Canvas (Standard)
Tan Canvas (Standard)
Black Paper (Standard)
Tan/Black G10 +$85.00
Red/Black G10 +$85.00
Green/Black G10 +$85.00
Orange/Black G10 +$85.00
Yellow/Black G10 +85.00
Blue/Black G10 +85.00
Pricing:
NMFSH Combat Grade CG Regular Price: $427.00. . . Special Santa Ganzaaaa Price: $397.00 You save ($30.00)
NMFSH Double Cut DC Regular Price: $527.00 . . . Special Santa Ganzaaa Price: $477.00 (You Save $50.00!!!)
(1) NMFSH CG
(2) NMFSH DC
Scrapmax 460
Blade Length: 4.5”
Overall Length: 9”
Blade Width: 1”
Blade Thickness: .095”
Grind: Full Height Flat
Steel: Elmax
Handle: Resiprene C
Price: $89.95
(3) Scrapmax 460
Scrapmax 460 Trail Point
Blade Length: 4.5”
Overall Length: 9.1875”
Blade Width: 1”
Blade Thickness: .095”
Grind: Full Height Flat
Steel: Elmax
Handle: Resiprene C
Price: $89.95
(4) Scrapmax 460 Trail Point
SYKCO 311 (Tanker Gray Edition) Specs:
Blade Length: 3 1/2”
Overall Length: 8”
Blade Width: 1 1/4”
Blade Thickness: Approx 3/16”
Grind: Saber
Finish: Tanker Gray
Steel: SR101 58-60Rc
Handle: Resiprene C
Price: $69.95
(5) SYKCO 311
SYKCO 511 (Tanker Gray Edition) Specs:
Blade Length: 5 1/2”
Overall Length: 10”
Blade Width: 1 3/8”
Blade Thickness: Approx 3/16”
Grind: Saber
Finish: Tanker Gray
Steel: SR101 58-60Rc
Handle: Resiprene C
Price: $89.95
(6) SYKCO 511
SYKCO 711 (Tanker Gray Edition) Specs:
Blade Length: 7 3/8”
Overall Length: 12 1/2””
Blade Width: 1.65”
Blade Thickness: Approx 1/4”
Grind: Saber
Finish: Tanker Gray
Steel: SR101 58-60Rc
Handle: Resiprene C
Price: $139.95
(7) SYKCO 711
Swamp Rat Sterile Overrun Specs:
Blade Length: 6 3/8”
Overall Length: 11 3/4”
Blade Width: 1.60”
Blade Thickness: Approx. 1/4”
Grind: Saber
Finish: Desert Camo
Steel: SR101 58-60Rc
Handle: Tan Canvas
Price: $158.95
(8) Swamp Rat Sterile Overrun
.
Last edited: