Sar-3 Choiled ...OUCH!!!!

Joined
Jul 11, 2008
Messages
361
aha034.JPG


aha033.JPG


aha028.JPG


aha029.JPG


She came that close to being Choiled.!! After seeing her nice countersunk
Talon- Hole and the blended radiuses i just couldnt chop a piece off!!
Hey, Iam starting to learn the Hog-Foolery.!!
If someone wants to send me a few SAR-3s to experiment with i will do my best
I just have one..!!
Jaxx, Knife Hunter. !! HA!!
 
If you don't want to do it, i'll bring it to work with me and do it for you. You know you want it done... just do it... do it... do it...
 
Last edited:
HA! ...So close & yet soooo far! ;)

:D

NOTE: Do keep in mind that all mods done that remove steel by anyone other than Busse Combat may void your knife's warranty. Just something to consider...
 
Jaxx...... Your bound to have something like it just laying around HA HA!!

Actually, sort of... I have a HACKtive Duty that fits the bill... It's a Busse HACK series Active Duty. The only one I've seen so far, but I imagine that there's bound to be others popping up here & there in the near future. I'm hoping that Garth & crew get the urge to do a few SAR3's this way for the BLADE show. (hint, hint ;))

Busse_HACK-AD.jpg
 
Actually, sort of... I have a HACKtive Duty that fits the bill... It's a Busse HACK series Active Duty. The only one I've seen so far, but I imagine that there's bound to be others popping up here & there in the near future. I'm hoping that Garth & crew get the urge to do a few SAR3's this way for the BLADE show. (hint, hint ;))

Busse_HACK-AD.jpg

Whoa!! Where did that come from?? I like that....a lot!
 
Wow! What a freakin tease!!! I even said "Get on with it!!" after the 3rd set up photo. I was excited... Doh! :(
 
Whoa!! Where did that come from?? I like that....a lot!

My proxy snagged it at the Spring KC show. The only one there that he saw... I asked him that specifically, with the intent to grab all available as I'm a fan of the choil, and I'm a huge fan of the AD. :)
 
I would look at keeping the rear portion of the talon hole....this will keep the gaurd so to speak, and give the appearance of a trigger that would give extra grip too.

If you dont like it then remove the rest as shown above:)
 
Good Gosh man!! Thats a choils from hel-vin to dream for!!
Ive discovered the Busse addiction too late!!
Need to get out now!! HA!! HA!!
 
Actually, sort of... I have a HACKtive Duty that fits the bill... It's a Busse HACK series Active Duty. The only one I've seen so far, but I imagine that there's bound to be others popping up here & there in the near future. I'm hoping that Garth & crew get the urge to do a few SAR3's this way for the BLADE show. (hint, hint ;))

Busse_HACK-AD.jpg


Ha!:p Show them the LrMrS LE I sold you awhile back and the choil you had Garth put in it! Now that's a choil job...and them some!:thumbup:


You guys don't even know a tenth of some of the FreakingAssCool chit Jaxx has had modded. An old MS proto comes to mind.....eh Jaxx?;)



:cool:
 
Actually, sort of... I have a HACKtive Duty that fits the bill... It's a Busse HACK series Active Duty. The only one I've seen so far, but I imagine that there's bound to be others popping up here & there in the near future. I'm hoping that Garth & crew get the urge to do a few SAR3's this way for the BLADE show. (hint, hint ;))

Busse_HACK-AD.jpg

I want a few of these!
 

Ha!:p Show them the LrMrS LE I sold you awhile back and the choil you had Garth put in it! Now that's a choil job...and them some!:thumbup:


You guys don't even know a tenth of some of the FreakingAssCool chit Jaxx has had modded. An old MS proto comes to mind.....eh Jaxx?;)

I still love that LE! :thumbup: Here's an old pic...

Meaner_Meanerer.jpg


And an original CS AD that also had a larger choil added. I snagged this off the X many moons ago...

LeanMeanSt_ActiveDuty1.jpg


I can't take any credit for the MS proto fatty. That was sent off to Reese Weiland by its previous owner for the sweet total makeover...I'm just the one lucky enough to own it now!

RedStripe_RWMSPC.jpg

Photo Credit for these 2 images below: ronybear
msproto2b.jpg

msproto1.jpg


It looked like this originally:
MSP1.jpg
 
HA HA!!! Trying to learn the foo!! Yall Hogs are way too smart.!!
Hope i caught a few in a leg snare anyway.HA HA!!
 
That MS Proto is still one of my most desired Busse knives. In it's original form it looks so badass.

There isn't too much out there I really feel driven to own these days. I've got my three grails and have been feeling pretty satisfied lately. That MS proto however does tempt.
 
A 3/4 " carbide end mill was going to do the job but i couldnt hit the go button!!
Walked around the machine, went to the other side looked,, Dang,, I just cant do it!!
Hope this dont take HOG points away!! HA HA!!
 
Back
Top