Seb Question-Is this normal?

Status
Not open for further replies.
JTR357

JTR357

Gold Member
Joined
Sep 10, 2007
Messages
14,133
Hi,I just received this knife a couple of days ago.It's a large 21 with a ladder damascus blade.
My question is regarding the hardware.There is a "screw face" showing on both sides.Isn't one side supposed to be smooth?

IMG_0256.jpg


Here's the other side.Pic only shows two screws,but the third screw is just like the rest(screw face,not smooth).

IMG_0260.jpg


After the first dis-assembly,clean,lube,re-assembly,I usually switch the screw-face side to the lock side.This is only my second Sebenza.The other one had inlays.Is this right?

Thanks
 
This is the sharpest Reeve I ever had(which is only three:rolleyes:) .The edge came highly polished.The bevels are perfectly even.It's obvious someone spent a good deal of time on finishing it.
 
That's a nice blade on that one, lader or raindrop is always a good choice on a CRK.

I think I perfer the new screws over the original ones. They solve that whole to flip or not to flip problem too. :p:thumbup:
 
Both your pictures show the same side. Just sayin'.



JTR357 said:
..Isn't one side supposed to be smooth?

IMG_0256.jpg


Here's the other side.Pic only shows two screws,but the third screw is just like the rest(screw face,not smooth).

IMG_0260.jpg


After the first dis-assembly,clean,lube,re-assembly,I usually switch the screw-face side to the lock side.This is only my second Sebenza.The other one had inlays.Is this right?

Thanks
Click to expand...
 
The stainless damascus that CRK uses is an amazing steel. Use it well. It is a great cutter.
 
Status
Not open for further replies.
Back
Top