ShamRuckO'Ganzaaaaa Pricing. . .Etc. . . . .

Status
Not open for further replies.

Jerry Busse

Moderator
Joined
Aug 20, 1999
Messages
12,080
Here it is gang! All of the necessary info you'll ever need for the ShamRuckO'Ganzaaaaa !!!!!!

I also put a duplicate thread as a sticky at the top of this forum, but it is locked and loaded.




The ShamRuckO'Ganzaaaa will be this Sunday, March 21st between 9:00pm and 10:00pm Eastern. If the forums are shut down due to an overload in traffic, as has happened in past Extravaganzaaaas. . . I will continue to attempt posting the "Go" button until I am able to get through on one of the 5 Busse Knife Group forums.

1) http://www.bussecombat.com/home/index.shtml

2) http://www.scrapyardknives.com/ubbthreads/postlist.php?Cat=0&Board=Knives

3) http://www.swampratknifeworks.com/cgi-bin/ultimatebb.cgi?ubb=forum;f=10

4) http://www.bladeforums.com/forums/forumdisplay.php?f=713

5) http://www.bladeforums.com/forums/forumdisplay.php?f=778

EMERGENCY BACK-UP Plan!!!!!. . . If the forum shuts down and I am unable to post, or you can not get on to see whether or not the "GO" Button has been posted, we are implementing an emergency back-up plan that consists of an automatic "GO" at 9:55 pm Eastern!

Your email can not be marked any earlier than 9:55 pm Eastern unless I am able to post the "GO" button before that time. . . . If the automatic "GO" is used then ALL EMAILS MARKED 9:54 pm or earlier will be put at the end of the line!!!!. . . So, be careful not to jump the gun boys!!!

Some of the knives being offered are extremely limited in number. So, be sure to include second and third choices in your emails, as the pieces you request might be sold out before you get your email in. . . . You might be wise to include a fourth, fifth, sixth choice, etc. . . in order to score!

We need to know the total number of knives you want to purchase. You must tell us HOW MANY of each knife you want from the list you send us. You can also include how much you want to spend. For example, you might list 10 knives and tell us that you do not want to exceed $3,000.00. Please list the knives in your order of priority

You must include the knife's description and pricing in your order.

You must include your Forum name and your REAL name and address as well as phone numbers and any other pertinent info that we may need in order to contact you for payment and shipping info.

Email both the office amy@bussecombat.com and myself at busse@bright.net AFTER the "GO" Button is posted by me on one of the Busse Knife Group Forums.

WARNING!!! The INFI HOGs are a treacherous group and are not to be trusted!!! They will post under names that look similar to mine (Be sure that it says "Moderator" under my name if it is on Bladeforums) and will bring up MANY false “GO” threads from the past in order to get others to order BEFORE the actual ShamRuckO'Ganzaaaa GO THREAD!!!! DO NOT fall for this as so many have in the past and be left out in the cold.

Orders are taken in the order in which we receive them.


**** Important Note: Those who intentionally overload their order request and then cancel most or part of their order AFTER notifications have been sent out, will lose their place and be put at the end of the line, where they may or may not get any of their requested knives. "Order loading" causes innumerable problems for our office. *******

Amy and the other girls will need a few days to sort this thing out. Do not expect any notifications to be sent out until next Thursday.

So, rev up your mouse and get ready for a wild one!!!

Good luck boys. . . . It looks like it's gonna be a ShamRuckO'Ganzaaaa of Blarney Stone proportions!!!!!! :eek:

Jerry :thumbup:


Pricing and Specs are posted below. . .


Specs:

AK47
Thickness: Approx. 3/16"
Blade length: 18 1/2"
OAL: 29"
Steel: INFI

Ruck
Thickness: Approx. 3/16"
Blade length: 15"
OAL: 23"
Steel: INFI

Urban Grudge
Thickness: Approx. .240"
Blade length: 5 1/2"
OAL: 10 1/2"
Steel: INFI

RatChute Mandu
Thickness: Approx. 3/16"
Blade length: 5 1/4"
OAL: 10 1/4"
Steel: SR-101

Wiener Dog
Thickness: Approx. 1/8"
Blade length: 3 3/4"
OAL: 8 3/4"
Steel: 154 CM


A1 AK47 Satin/HS black and Tan G-10………….$1097.00
A2 RUCK Satin/HS black and Tan G-10………….$897.00

Reg. price set..$1994.00 Buy the set…..$1797.00 (*save $197.00)
* A Coated AK47 or Ruck can be mixed with a Satin Ruck or AK47 in order to receive a special "Set Discount". Contact Amy for details.
AKRuckTanBlackTan-1.jpg





B1 AK47 Black with HS Black/Tan Canvas ……..…$797.00
B2 RUCK Black with HS Black/Tan Canvas……..…$597.00

Reg. price set…$1394.00 Buy the set……..$1297.00 (*save $97.00)
* A Coated AK47 or Ruck can be mixed with a Satin Ruck or AK47 in order to receive a special "Set Discount". Contact Amy for details.
AKRuckBlackTan-1.jpg






C1 AK47 Satin with Black Paper…………………..$997.00
C2 RUCK Satin with Black Paper………………….$797.00

Reg. price set….$1794.00 Buy the set………$1597.00 (*save $197.00)
* A Coated AK47 or Ruck can be mixed with a Satin Ruck or AK47 in order to receive a special "Set Discount". Contact Amy for details.
AKRuckBlackPaper-1.jpg







D1 AK47 Satin/HS black and white G-10………….$1097.00
D2 RUCK Satin/HS black and White G-10……..….$897.00

Reg. price set..$1994.00 Buy the set…..$1797.00 (*save $197.00)
* A Coated AK47 or Ruck can be mixed with a Satin Ruck or AK47 in order to receive a special "Set Discount". Contact Amy for details.
KenseiRuckBlkTan-1.jpg






E1 Wiener Dog………….$59.95
WienerDog2-1.jpg






F1 Urban Grudge …….$257.00
SuperCavonblack-1.jpg






G1 RatChute Mandu………………..$178.95
RMDCustom-1.jpg



 
Hey, Amy! Could you get the Bossman to tell us about or show us a pic of the spine on the Urban Grudge, please? Is it a false edge or is there some flat spine left between the swedge grinds??? Please Snoopy dance him, willya?? ;) :D:D
 
hey, amy! Could you get the bossman to tell us about or show us a pic of the spine on the urban grudge, please? Is it a false edge or is there some flat spine left between the swedge grinds??? Please snoopy dance him, willya?? ;) :d:d


YES...............I can do that
 
The Grudge swedge is not brought to an edge and can not be sharpened. There is a flat that is approx. .090 wide. along the entire length.


Hope that helps! :thumbup:

Jerry :D




.
 
I can see a lot of the B2 Rucks flying out the door! When was the last time we saw a price that sweet on a ruck?
 
The Grudge swedge is not brought to an edge and can not be sharpened. There is a flat that is approx. .090 wide. along the entire length.


Hope that helps! :thumbup:

Jerry :D

.

Amy got you with the Snoopy Dance, didn't she?? ;):D

Yes it most certainly does help, and exactly what I was hoping to hear versus a false edge. :thumbup::thumbup: If I understand you correctly, it will have a tiny bit wider flat spine between the swedge than the average HG55 (along the curved area of the HG55's spine leading to the tip), yes? Excellent!! :D Thank you, Jerry! :)
 
I was wanting to double check on the blade size of the large AK. Is this the correct lengths Blade length: 18 1/2" OAL: 29"? I was comparing it to my other blades to get a idea and it seemed the size was a lot smaller than I had thought. These are probably not in a sword category due to the blade length. The red lines on the tape measure indicate the dimensions called out, and the photo chopped sword is a estimate of the size.


ak.jpg
 
Dang. These all look so good. I may have to forgo the chance at a bp n satin ruck for the coated black n tan ruck and an urban grudge.
 
Is there a way one can get disqualified? I need to plan stuff ahead.
 
Last edited:
I was wanting to double check on the blade size of the large AK. Is this the correct lengths Blade length: 18 1/2" OAL: 29"? I was comparing it to my other blades to get a idea and it seemed the size was a lot smaller than I had thought. These are probably not in a sword category due to the blade length. The red lines on the tape measure indicate the dimensions called out, and the photo chopped sword is a estimate of the size.


ak.jpg

Swamp Rat Waki is similar to AK47. And you know what you get when you see the name Waki.
 
Ok, I appreciate it,I like the design but I wish the blade length was a little longer, that's all. Still a good deal.
 
Status
Not open for further replies.
Back
Top