Sharpen chisel grind leatherman micra on the edge pro?

[CrimsonTideShooter]

Well I must be doing something wrong because I successfully dulled the hell out of the little blade on the leatherman micra.


How in the world do you sharpen these little bastards?

 

[Heiheit]

You're going to want to sharpen just the one side with the bevel ground. Go through the stones and after each stone, use your highest grit tape or stone on the side without a bevel ground; lower the angle and barely using any pressure whatsoever make one or two strokes. Continue until you finish with your tapes/stones and if there is still a burr, use a strop or leather belt to remove it (remember to adjust angles accordingly).