So how old is my Delica?

J

JohnnyMayhem

Joined
Aug 6, 2006
Messages
1,360
So I was out at a show in Portland and I found a well worn all stainless Delica. I noticed that it was a fairly old model because it was tapped for one pocket clip position (tip down), the edges around the handle were a lot more square compared to the newer ones, plus the blade was in AUS6 with Seki City stamped on the other side.

 
I believe that makes it a Delica 2. I just had an opportunity for an Endura 2 that was very similar in materials and features
 
Looks like the tip has been re-profiled--fairly common mod following tip damage. Those early Delicas had very pointy tips that would snap off if used to pry something. I miss the pointy blades but I understand why they are now a little shorter and a little less pointy.
 
That is actually a C05 standard,predecessor to the delica. As for age I'd guess 1990-95.
 
JohnnyMayhem said:
I called yesterday about getting a re-blade, but I haven't heard back yet.
Click to expand...

I don't think they can "re-blade" it, as in replacing the blade... but they'll give it a nice once over and sharpening.

Might want to look into a third-party crafstman here to stone wash that handle too!
 
You don't need to send it in. Aus6 is easy to sharpen.

Scrub out the knife with hot soapy water and a toothbrush...dry with paper towels.

The stainless scales will respond to sandpaper, 400 and 600 grit can give them a nice finish, anything above that gives it more polish. However, make sure you go with the sandpaper in one direction (e.g. down the handle.)
 
I'm thinking then I'll just order a new pocket clip and then etch the scales, possibly with the Mayhem Incorporated logo (my sideshow's name) or something interesting on there.
 
You must log in or register to reply here.
Back
Top