This is I have been unemployed for 3 months sale. Sad but true. Anyways at this point every little bit helps.
Black Jack 1-7 in micarta, A2 tool stool, Warner made knife. Used but in very good condition. Graying of the blade but extremely sharp, has aluminum butt cap and original leather sheath and box. Because of patina(it isn't that bad and I think looks nice, from honest use) I would say 90% SOLD
Next up are 3 fixed blades all hand made.
Top is a Sam Stoner knife, 01 tool steel forged, Amish knife maker. Black wood handle and Robert Jones sheath I bought for it. Just a very nice and sharp traditional all handmade hunter/ bowie pattern. This fella uses no power tools so this is truly handmade. I think I have the old sheath to this knife too it is a left handed sheath and actually is made very well and is extremely heavy duty. SOLD
Next in the middle is a Steve Shiffer bowie. 01 tool steel, 14" long with an 8" blade. S.S. guard I believe, milled out in the center, I can't tell if this is a one piece carbon fiber block handle. If the seam is there I am having a tough time seeing it. Some peppering on both sides of the blade, you can feel it slightly and would probably clean up with toothpaste and a tooth brush maybe. I bought this from the original vendor that had it. It is very blade heavy and bit better than 3/16" at the spine. Sheath again on this extremely heavy duty and thick. Some of the dye is wearing through on the front and I think it is decorated with his Scottish Thistle design. Original edge and never used. Has original price tag on the sheath and this is shown on his website in the Bowie section. $175 shipped
Bottom knife is a Joe Calton knife, deep belly drop point kind of like after the old Gerber style flayer or you could say a deep dropped point. 52100 deeply etched with his heat treat which is very similar to what Fowler does I believe. Right at 3/16" at the spine, black stained tiger maple, nickel silver guard and one of the best heavy duty sheaths I've seen. Blade is about 4.5" to the guard. Tourqoise and black spacers, nickel silver pins and 9.5" long. I just got this last week but am keeping his trout/bird pattern. $150 shipped
Next are 3 folders all handmade.
Top knife, red micarta, about 3.75" persian style or trailing point folder by Jeff Hall. I bought it from the original owner and he indicated to me that it was an early folder done by Hall. I drilled and tapped it for 5-40 screws to mount a clip. I ain't guaranteeing the accuracy of said drill and tap either. Looks good to me though. Heavy duty liner lock that locks up excellent with a ton of room for wear in. I put shrink tubing on the studs to get better traction for my crappy hands. This has been used sparingly but it has and it razor sharp. $300 shipped.
Next up is my last Flarehty folder M1 style. Staining on the blade, very rare item, A2 tood steel and SUPERB lock up that ain't moved one iota since I've owned it. Have the box etc. This is about as heavy a duty folder as you will find in a frame lock and is very very well machined. I just cleaned the blade up so it is bright and not stained up and I did it very well. SOLD
Next up is a Raleigh Tabor folder. Slightly over .125 thick, high deep hollow grind 154cm steel. Red micarta, rock solid lock up and this thing has been carried a bit and used and is again razor sharp. I am the original owner. Mark on the clip and a bit of staining along the edge. It isn't dicolored or anything but you can see a slight cloud in the right light along each side. Almost like it was etched or something, it is original to the knife. Knife is about 9.5" with a 4.25" blade to the micarta. Some beauty marks on the micarta in the form of light scratches and again would probably polish out if you feel the need. Black micarta back spacer. This is a really nice handmade for the price and I ain't kiddin. $225 shipped.
I take pp or m.o. and I ship fast on my dime. USPS Priority mail with d/c and insurance etc.etc. These are posted elsewhere too so first come first served. May add to this thread as knives go. Just to clarify lock up on the folders, lock up on all 3 is SUPERB, left side with a ton of room for wearing in. I took a pic of the lock up but frankly my skills suck and the camera ain't that great but rest assured the lock up is what I say it is. keepem sharp and thanks
PS all the knives are coated with either Balistrol or CLP oil, so finger prints are showing, no major scratches etc. on any of the blades
Black Jack 1-7 in micarta, A2 tool stool, Warner made knife. Used but in very good condition. Graying of the blade but extremely sharp, has aluminum butt cap and original leather sheath and box. Because of patina(it isn't that bad and I think looks nice, from honest use) I would say 90% SOLD
Next up are 3 fixed blades all hand made.
Top is a Sam Stoner knife, 01 tool steel forged, Amish knife maker. Black wood handle and Robert Jones sheath I bought for it. Just a very nice and sharp traditional all handmade hunter/ bowie pattern. This fella uses no power tools so this is truly handmade. I think I have the old sheath to this knife too it is a left handed sheath and actually is made very well and is extremely heavy duty. SOLD
Next in the middle is a Steve Shiffer bowie. 01 tool steel, 14" long with an 8" blade. S.S. guard I believe, milled out in the center, I can't tell if this is a one piece carbon fiber block handle. If the seam is there I am having a tough time seeing it. Some peppering on both sides of the blade, you can feel it slightly and would probably clean up with toothpaste and a tooth brush maybe. I bought this from the original vendor that had it. It is very blade heavy and bit better than 3/16" at the spine. Sheath again on this extremely heavy duty and thick. Some of the dye is wearing through on the front and I think it is decorated with his Scottish Thistle design. Original edge and never used. Has original price tag on the sheath and this is shown on his website in the Bowie section. $175 shipped
Bottom knife is a Joe Calton knife, deep belly drop point kind of like after the old Gerber style flayer or you could say a deep dropped point. 52100 deeply etched with his heat treat which is very similar to what Fowler does I believe. Right at 3/16" at the spine, black stained tiger maple, nickel silver guard and one of the best heavy duty sheaths I've seen. Blade is about 4.5" to the guard. Tourqoise and black spacers, nickel silver pins and 9.5" long. I just got this last week but am keeping his trout/bird pattern. $150 shipped
Next are 3 folders all handmade.
Top knife, red micarta, about 3.75" persian style or trailing point folder by Jeff Hall. I bought it from the original owner and he indicated to me that it was an early folder done by Hall. I drilled and tapped it for 5-40 screws to mount a clip. I ain't guaranteeing the accuracy of said drill and tap either. Looks good to me though. Heavy duty liner lock that locks up excellent with a ton of room for wear in. I put shrink tubing on the studs to get better traction for my crappy hands. This has been used sparingly but it has and it razor sharp. $300 shipped.
Next up is my last Flarehty folder M1 style. Staining on the blade, very rare item, A2 tood steel and SUPERB lock up that ain't moved one iota since I've owned it. Have the box etc. This is about as heavy a duty folder as you will find in a frame lock and is very very well machined. I just cleaned the blade up so it is bright and not stained up and I did it very well. SOLD
Next up is a Raleigh Tabor folder. Slightly over .125 thick, high deep hollow grind 154cm steel. Red micarta, rock solid lock up and this thing has been carried a bit and used and is again razor sharp. I am the original owner. Mark on the clip and a bit of staining along the edge. It isn't dicolored or anything but you can see a slight cloud in the right light along each side. Almost like it was etched or something, it is original to the knife. Knife is about 9.5" with a 4.25" blade to the micarta. Some beauty marks on the micarta in the form of light scratches and again would probably polish out if you feel the need. Black micarta back spacer. This is a really nice handmade for the price and I ain't kiddin. $225 shipped.
I take pp or m.o. and I ship fast on my dime. USPS Priority mail with d/c and insurance etc.etc. These are posted elsewhere too so first come first served. May add to this thread as knives go. Just to clarify lock up on the folders, lock up on all 3 is SUPERB, left side with a ton of room for wearing in. I took a pic of the lock up but frankly my skills suck and the camera ain't that great but rest assured the lock up is what I say it is. keepem sharp and thanks
PS all the knives are coated with either Balistrol or CLP oil, so finger prints are showing, no major scratches etc. on any of the blades
Last edited:
