Sourcing G10 TUBE

[clint c]

Hi all, it has been some time since I posted here, but have faithfully been lurking! I have seen some fellas using G10 tube to surround handle pins as an added accent. I have done some google-fu and see G10 tube available at several industrial supply houses, but usually in “natural” colour in a huge quantity that I don’t need or want.

Anyone out there have a source for some orange or other colour G10 tubing with about 1/4 inside diameter?

Thanks,

Clint

 

[TLR]

I got some from Mcmaster Carr I believe with an order once but the hole in the middle was far enough off center that I never have used it.

 

[Natlek]

Hi all, it has been some time since I posted here, but have faithfully been lurking! I have seen some fellas using G10 tube to surround handle pins as an added accent. I have done some google-fu and see G10 tube available at several industrial supply houses, but usually in “natural” colour in a huge quantity that I don’t need or want.

Anyone out there have a source for some orange or other colour G10 tubing with about 1/4 inside diameter?

Thanks,

Clint

Not tube but I don t see problem to drill hole inside ................
https://www.bladeforums.com/threads...lass-fiber-rods-as-knife-handle-pins.1444843/
The second option is to make them .Cut square piece from G10 panel in adequate thickness and on lathe ............

 

[i4Marc]

Not sure about G10 but these guys have carbon fiber tubes.

http://stores.ebay.com/Maker-Material-Supply