robotech
BANNED
- Joined
- Feb 22, 2009
- Messages
- 1,047
Price is firm.
I have the original cost of the knife, $30.00 in parts, and 20 hours of labor in this project.
If you don't want to pay for a CUSTOM Spyderco, then that's OK, but no offers or trades will considered.
Price includes PayPal fees and shipping with tracking to the US.
International shipping on conditions.
Shipping WILL be higher, I won't lie on the Customs form, and I have NO responsibility for the item after it hits Customs.
Spyderco Breedan Rescue.
NO box.
Replaced the black G-10 with textured Blue G-10.
Stonewashed everything but the screws (standoffs still need to be dusted off).
Replaced the button head scale screws with recessed flat head to go from T-6 TORX to T-9 TORX.
New Bronze pivot bushings.
Custom standoffs.
Then replaced the clip screws with button head T-9 TORX. Pivot screw already T-9 TORX.
Now one driver can take the knife apart.
Left the right side rivet heads alone, except to slightly recess so a thin object (fingernail) can't get under them.
Action is "floating" smooth, lock up at 30%, and blade centered.
Absolutely perfect custom on a Spyderco rescue frame.
Modified then put up. Never carried and only sharpened to recover edge after stonewash. $200.00
I have the original cost of the knife, $30.00 in parts, and 20 hours of labor in this project.
If you don't want to pay for a CUSTOM Spyderco, then that's OK, but no offers or trades will considered.
Price includes PayPal fees and shipping with tracking to the US.
International shipping on conditions.
Shipping WILL be higher, I won't lie on the Customs form, and I have NO responsibility for the item after it hits Customs.
Spyderco Breedan Rescue.
NO box.
Replaced the black G-10 with textured Blue G-10.
Stonewashed everything but the screws (standoffs still need to be dusted off).
Replaced the button head scale screws with recessed flat head to go from T-6 TORX to T-9 TORX.
New Bronze pivot bushings.
Custom standoffs.
Then replaced the clip screws with button head T-9 TORX. Pivot screw already T-9 TORX.
Now one driver can take the knife apart.
Left the right side rivet heads alone, except to slightly recess so a thin object (fingernail) can't get under them.
Action is "floating" smooth, lock up at 30%, and blade centered.
Absolutely perfect custom on a Spyderco rescue frame.
Modified then put up. Never carried and only sharpened to recover edge after stonewash. $200.00