- Joined
- Jun 9, 2006
- Messages
- 672
A few Spydercos for your consideration....
The first person to post “I'll take it” without contingencies and a follow up e-mail will receive purchasing priority.
Please ask any questions prior to making a purchase commitment. My top priority is a hassle free transaction. I'll be more than happy to provide additional / higher resolution photos and discuss questions via PM, e-mail, or over the phone. I've done my best to accurately describe the condition of the knives I'm offering for sale, but if you have any concerns I'll gladly do what I can to address them to your satisfaction.
I will accept payment via USPS Money Order, or PayPal with a confirmed address per the pricing listed. I will ship via USPS insured w/signature confirmation to CONUS only.
I'm not interested in any trades at this time.
I reserve the right to not do business with any individual without explanation. All sales are “as is, where is” and without warranty (except as provided by the manufacturer). All sales are final. By purchasing this item you are stating that you are 18 years of age or older and abiding by all local, state and federal laws concerning the purchase, transportation and possession of this item.
Spyderco Delica 4, C11PBLE w/ Box: I believe this was the first Spyderco knife to use a solid ZDP-189 blade. It was a limited edition Sprint Run with blue FRN handles. I purchased this knife from a fellow forum member as “NIB“, which appears accurate. The knife is in the condition I received it. $100 USPS MO / $104 PayPal
Spyderco Delica 4, C11PSFG w/ Box: VG-10 Combination Edge blade, Foilage Green FRN handle. This knife is new, as received from the factory. It has not been used or sharpened. $45 USPS MO / $47 PayPal
Spyderco ATR, C70PTI w/ Box: “At The Ready”. CPM S30V blade, Titanium handle. I purchased this knife from a fellow forum member as “NIB”, which appears accurate. The knife is in the condition I received it. However, I want to point out that there are some very fine scratches in a few spots on the handle of the knife. The close up photo shows the largest of these “spots”, but there are a few others. Without magnification these are very small little marks that are only seen under the right light and close inspection, they are very minor. The polished titanium slabs are especially susceptible to scratching. I don't know the origin of these small scratches, but I do believe that even the most careful use will result in more visible wear. I believe the following information came from Spyderco, but I won't swear to it, nor will I guarantee it's accuracy:
“Length overall 8 1/2" (214 mm), blade length 3 7/16" (87 mm) blade steel CPM-S30V, length closed 5" (129 mm), cutting edge 3 1/4" (82 mm), weight 4.75 oz (135 g), hole diameter 1/2" (13 mm), blade thickness 1/8" (3 mm), handle material Titanium.... A.T.R. is an acronym for At The Ready -- and it is. Spyderco showcases several technologically advanced features offered to the cutlery world in this high-end tactical folder. Voted 'Knife of The Year 2003' by Knives Illustrated magazine.... We precision machine a fistful of 6AL4V titanium into a handle then drilled it full of holes. The holes lessen weight, doubling as indexing divots in order to rotate the folder from one grip position to another. A second set of holes machined from the contoured pocket clip line up with the handle's holes for balanced indexing. Curvy expansions on opposite ends of the handle flare outward into a choil and a pinky shelf insuring the hand remains gripped on the folder in any draw. Rated suitable for heavy or MBC-use, the Compression Lock is integrated, actually part of the handle scale. The CPM-S30V blade is hollow-ground with a sloping unsharpened swedge down the spine. As the tip sweeps down, the belly sweeps up to meet it, making a thick substantial tip for aggressive penetration and cutting. Seated above the Spyderco Round Hole is a Cobra Hood. While deploying the blade the thumb naturally positions itself under the overhang of the Cobra Hood properly positioning the thumb pad over the hole by feel (rapid deployment). Once opened, the textured Cobra Hood functions as a support/control seat for the thumb while cutting. Clip fastens into pre-tapped positioning holes for tip-up, left/right-hand carry.” $340 USPS MO / $352 PayPal SOLD
Spyderco ATR, C70P w/ Box: “At The Ready”. VG-10 blade, Stainless Steel handle. I purchased this knife from a fellow forum member as “NIB”, which appears accurate. The knife is in the condition I received it. However, I want to point out that there are some very fine scratches on the left side of the handle that can be seen in the close up photo. Without magnification it looks like a very small smudge, but as the close up picture shows it is in fact several tiny scratches. It takes the right light and a close look to see this, it is pretty minor. See the post above on the Ti version of this knife for additional background information on the ATR style knife. $135 USPS MO / $140 PayPal SOLD
Spyderco Military, C36CFBGP w/ Box: BG-42 blade, Carbon Fiber handle. I purchased this knife from a forum member as new, unused and unsharpened, which appears to be accurate. The knife is in the condition I received it. However, I want to point out that the tip of the blade is slightly off center when the knife is closed as can be seen in one of the photos below. I don't believe there is any practical ramification from this and I'm fairly certain it came from the factory this way, but it may be of interest to some so I'm pointing it out. $295 USPS MO / $305 PayPal
The first person to post “I'll take it” without contingencies and a follow up e-mail will receive purchasing priority.
Please ask any questions prior to making a purchase commitment. My top priority is a hassle free transaction. I'll be more than happy to provide additional / higher resolution photos and discuss questions via PM, e-mail, or over the phone. I've done my best to accurately describe the condition of the knives I'm offering for sale, but if you have any concerns I'll gladly do what I can to address them to your satisfaction.
I will accept payment via USPS Money Order, or PayPal with a confirmed address per the pricing listed. I will ship via USPS insured w/signature confirmation to CONUS only.
I'm not interested in any trades at this time.
I reserve the right to not do business with any individual without explanation. All sales are “as is, where is” and without warranty (except as provided by the manufacturer). All sales are final. By purchasing this item you are stating that you are 18 years of age or older and abiding by all local, state and federal laws concerning the purchase, transportation and possession of this item.
Spyderco Delica 4, C11PBLE w/ Box: I believe this was the first Spyderco knife to use a solid ZDP-189 blade. It was a limited edition Sprint Run with blue FRN handles. I purchased this knife from a fellow forum member as “NIB“, which appears accurate. The knife is in the condition I received it. $100 USPS MO / $104 PayPal
Spyderco Delica 4, C11PSFG w/ Box: VG-10 Combination Edge blade, Foilage Green FRN handle. This knife is new, as received from the factory. It has not been used or sharpened. $45 USPS MO / $47 PayPal
Spyderco ATR, C70PTI w/ Box: “At The Ready”. CPM S30V blade, Titanium handle. I purchased this knife from a fellow forum member as “NIB”, which appears accurate. The knife is in the condition I received it. However, I want to point out that there are some very fine scratches in a few spots on the handle of the knife. The close up photo shows the largest of these “spots”, but there are a few others. Without magnification these are very small little marks that are only seen under the right light and close inspection, they are very minor. The polished titanium slabs are especially susceptible to scratching. I don't know the origin of these small scratches, but I do believe that even the most careful use will result in more visible wear. I believe the following information came from Spyderco, but I won't swear to it, nor will I guarantee it's accuracy:
“Length overall 8 1/2" (214 mm), blade length 3 7/16" (87 mm) blade steel CPM-S30V, length closed 5" (129 mm), cutting edge 3 1/4" (82 mm), weight 4.75 oz (135 g), hole diameter 1/2" (13 mm), blade thickness 1/8" (3 mm), handle material Titanium.... A.T.R. is an acronym for At The Ready -- and it is. Spyderco showcases several technologically advanced features offered to the cutlery world in this high-end tactical folder. Voted 'Knife of The Year 2003' by Knives Illustrated magazine.... We precision machine a fistful of 6AL4V titanium into a handle then drilled it full of holes. The holes lessen weight, doubling as indexing divots in order to rotate the folder from one grip position to another. A second set of holes machined from the contoured pocket clip line up with the handle's holes for balanced indexing. Curvy expansions on opposite ends of the handle flare outward into a choil and a pinky shelf insuring the hand remains gripped on the folder in any draw. Rated suitable for heavy or MBC-use, the Compression Lock is integrated, actually part of the handle scale. The CPM-S30V blade is hollow-ground with a sloping unsharpened swedge down the spine. As the tip sweeps down, the belly sweeps up to meet it, making a thick substantial tip for aggressive penetration and cutting. Seated above the Spyderco Round Hole is a Cobra Hood. While deploying the blade the thumb naturally positions itself under the overhang of the Cobra Hood properly positioning the thumb pad over the hole by feel (rapid deployment). Once opened, the textured Cobra Hood functions as a support/control seat for the thumb while cutting. Clip fastens into pre-tapped positioning holes for tip-up, left/right-hand carry.” $340 USPS MO / $352 PayPal SOLD
Spyderco ATR, C70P w/ Box: “At The Ready”. VG-10 blade, Stainless Steel handle. I purchased this knife from a fellow forum member as “NIB”, which appears accurate. The knife is in the condition I received it. However, I want to point out that there are some very fine scratches on the left side of the handle that can be seen in the close up photo. Without magnification it looks like a very small smudge, but as the close up picture shows it is in fact several tiny scratches. It takes the right light and a close look to see this, it is pretty minor. See the post above on the Ti version of this knife for additional background information on the ATR style knife. $135 USPS MO / $140 PayPal SOLD
Spyderco Military, C36CFBGP w/ Box: BG-42 blade, Carbon Fiber handle. I purchased this knife from a forum member as new, unused and unsharpened, which appears to be accurate. The knife is in the condition I received it. However, I want to point out that the tip of the blade is slightly off center when the knife is closed as can be seen in one of the photos below. I don't believe there is any practical ramification from this and I'm fairly certain it came from the factory this way, but it may be of interest to some so I'm pointing it out. $295 USPS MO / $305 PayPal
Last edited:
