spyderco pm real or real fake?

What about it's box? Did you get that also? If you did: post some pics of that...
 
Been here over 10 years, welcome back. Did you want the bad news or just the bad news?
 
Fake, look at the lettering of Spyderco on the blade. The d is not closed , the r is slanted backwards, the r is longer than the other letters.
The screws look off.
 
The print is definitely off, but that's the least of its problems.

- The screw heads are strongly beveled and the drives are completely wrong
- The stop pin screws are larger than the rear standoff screws
- All of the jimping is wrong
- The screw countersinks in the G-10 are wrong
- There's no date code engraved on the tang
- The detent hole is too small
- The clip side liner is missing the forward relief cut and both liners have many other incorrect details
- The washers are teflon instead of PB
- The opening hole is too small
- The lanyard tube has no swells on the ends from being swedged into the scales
- The pivot pin isn't stepped
 
You must log in or register to reply here.
Back
Top