- Joined
- May 27, 2005
- Messages
- 4,616
SPFFOR SALE
Spyderco UK PenKnife. The stainless steel slabs where laser cut, hand drilled, hand sanded, hand fitted and have a stonewashed finish. Knife has not been carried or used. Box and original slabs/clip are included.
USPS money order or PayPal: $145.00
Factory description:
The blade on the UK Penknife is held open by a notched-joint at the knifes pivot. When closing the blade the notch produces roughly twenty-pounds of resistance, functionally similar to traditional slip-joint penknives. To achieve a heightened sense of control and comfort, Spyderco designers added a deep finger choil positioning the index finger on the bottom of the blade directly under the thumb. This lets you choke up nearer the cutting edge with comfort and dexterity. The handle is safety orange G-10 with a tension-wire clip that carries deeply in the pocket, tip-up and either left or right-handed. The CPMS30V laser cut blade is available PlainEdged and ground flat on both sides.
Specs:
length overall 6 15/16" (175mm)
blade length 2 15/16" (74mm)
blade steel CPM-S30V
length closed 4 1/16" (103mm)
cutting edge 2 5/8" (67mm)
weight 2.4oz (69g)
hole diameter 1/2" (13mm)
blade thickness 1/8" (3mm)
handle material G-10
Shipping will be done by USPS priority insured mail. Please email/PM me after posting or with any questions.
Thanks for looking.
Before:
After:
Spyderco UK PenKnife. The stainless steel slabs where laser cut, hand drilled, hand sanded, hand fitted and have a stonewashed finish. Knife has not been carried or used. Box and original slabs/clip are included.
USPS money order or PayPal: $145.00
Factory description:
The blade on the UK Penknife is held open by a notched-joint at the knifes pivot. When closing the blade the notch produces roughly twenty-pounds of resistance, functionally similar to traditional slip-joint penknives. To achieve a heightened sense of control and comfort, Spyderco designers added a deep finger choil positioning the index finger on the bottom of the blade directly under the thumb. This lets you choke up nearer the cutting edge with comfort and dexterity. The handle is safety orange G-10 with a tension-wire clip that carries deeply in the pocket, tip-up and either left or right-handed. The CPMS30V laser cut blade is available PlainEdged and ground flat on both sides.
Specs:
length overall 6 15/16" (175mm)
blade length 2 15/16" (74mm)
blade steel CPM-S30V
length closed 4 1/16" (103mm)
cutting edge 2 5/8" (67mm)
weight 2.4oz (69g)
hole diameter 1/2" (13mm)
blade thickness 1/8" (3mm)
handle material G-10
Shipping will be done by USPS priority insured mail. Please email/PM me after posting or with any questions.
Thanks for looking.
Before:
After:
Last edited:
