FCM415
BANNED
- Joined
- Jul 9, 2012
- Messages
- 1,985
The much anticipated,
SpyderNation Sign-up and Requirement Verification thread.
General information regarding the club can be found here: http://www.bladeforums.com/forums/showthread.php/1032273-*Official*-SpyderNation-Introduction-Thread Please take the time to read this introduction in its entirety if you are interested in becoming a member. It includes rules and member expectations that you need to be aware of.
Thanks to 9Blades, BladeChick777, salmonkiller, swoop03 and the rest of you who took the time to help get this project realized. From sharing your ideas for the group’s name, to voting on the poll, sharing ideas and concerns, and your words of encouragement, this was altogether a team effort.
General Requirements to join:
1) Must own at least one Spyderco
2) Have at least 50 posts on the Spyderco sub-forum. Exceptions will be made at an as per case basis. Generally, Basic or above members with 5 years of membership on BF but do not post often at all and find it difficult to reach 50 posts, may be eligible to skip #2 requirement. I’ll be charged with deciding who qualifies or not at least for now. I wont be out to turn anyone down so let me know your case. Also, Spyderco.com forum posts, count into the 50 subforum posts.
How to sign up:
1. Read this first: http://www.bladeforums.com/forums/showthread.php/1032273-*Official*-SpyderNation-Introduction-Thread
2. Reserve your post slot. Everything you will need to do should only be on this one post.
3. State that you have read Introduction thread in its entirety on your post.
4. State your combined post total between the Spyderco sub-forum, and the Spyderco.com forum.
5. Share a picture of your Spyderco knife/knives
6. Request your number. You may request to have a number reserved but you must complete requirements in a reasonable amount of time.
7. If you request an exception for requirement #2, do so and PM/email me with your case.
8. Once you are cleared, you get a welcome post.
Banners:
You can create your own, hopefully a member versed on MS Paint or whatever can help provide a template.
SpyderNation Sign-up and Requirement Verification thread.
General information regarding the club can be found here: http://www.bladeforums.com/forums/showthread.php/1032273-*Official*-SpyderNation-Introduction-Thread Please take the time to read this introduction in its entirety if you are interested in becoming a member. It includes rules and member expectations that you need to be aware of.
Thanks to 9Blades, BladeChick777, salmonkiller, swoop03 and the rest of you who took the time to help get this project realized. From sharing your ideas for the group’s name, to voting on the poll, sharing ideas and concerns, and your words of encouragement, this was altogether a team effort.
General Requirements to join:
1) Must own at least one Spyderco
2) Have at least 50 posts on the Spyderco sub-forum. Exceptions will be made at an as per case basis. Generally, Basic or above members with 5 years of membership on BF but do not post often at all and find it difficult to reach 50 posts, may be eligible to skip #2 requirement. I’ll be charged with deciding who qualifies or not at least for now. I wont be out to turn anyone down so let me know your case. Also, Spyderco.com forum posts, count into the 50 subforum posts.
How to sign up:
1. Read this first: http://www.bladeforums.com/forums/showthread.php/1032273-*Official*-SpyderNation-Introduction-Thread
2. Reserve your post slot. Everything you will need to do should only be on this one post.
3. State that you have read Introduction thread in its entirety on your post.
4. State your combined post total between the Spyderco sub-forum, and the Spyderco.com forum.
5. Share a picture of your Spyderco knife/knives
6. Request your number. You may request to have a number reserved but you must complete requirements in a reasonable amount of time.
7. If you request an exception for requirement #2, do so and PM/email me with your case.
8. Once you are cleared, you get a welcome post.
Banners:
You can create your own, hopefully a member versed on MS Paint or whatever can help provide a template.
Last edited:
