Strider Clip Screw

BBKoenigsegg · Aug 25, 2015

Just traded for a Strider PT Lego and it's coming without a clip. I already contacted Strider about sending me a new one but I want to be prepared to buy it elsewhere if that doesn't pan out. I noticed all of the aftermarket clips are sold without a screw. Does anyone know where I can get the screw? Thanks in advance!

BBKoenigsegg · Aug 25, 2015

Bump!

1SHOT1KILL · Aug 25, 2015

IIRC it is a standard 6-32 or 8-32 screw. I might have an extra, PM me if you need it.

BBKoenigsegg · Aug 26, 2015

Bump! Just in case 1SHOT can't dig one up, would anyone else know where to find one?

EricV · Aug 26, 2015

http://lmgtfy.com/?q=8-32+screw

1SHOT1KILL · Aug 26, 2015

2. What are the screw sizes for the AR/GB, SMF, SnG and PT?

AR/GB = 4-40 thread 0.250
SMF = 6-32 thread 0.430 long and a head 0.258 in diameter and 0.075 thick. Driver size is T-10 Torx.
SnG (Gen IV +) = 6-32 thread 0.375 long and a head 0.258 in diameter and 0.075 thick. Driver size is T-10 Torx.
SnG (Gen I - III) = 4-40 thread 0.355 long and a head 0.205 in diameter and 0.060 inches thick. The driver size is T-9 Torx
PT = 2-56 thread by 0.1875 on the body screws
Hinderer Lock Bar Stabilizer Screw = 2-56 thread by 0.250

BBKoenigsegg · Aug 27, 2015

1SHOT1KILL said:
2. What are the screw sizes for the AR/GB, SMF, SnG and PT?

AR/GB = 4-40 thread 0.250
SMF = 6-32 thread 0.430 long and a head 0.258 in diameter and 0.075 thick. Driver size is T-10 Torx.
SnG (Gen IV +) = 6-32 thread 0.375 long and a head 0.258 in diameter and 0.075 thick. Driver size is T-10 Torx.
SnG (Gen I - III) = 4-40 thread 0.355 long and a head 0.205 in diameter and 0.060 inches thick. The driver size is T-9 Torx
PT = 2-56 thread by 0.1875 on the body screws
Hinderer Lock Bar Stabilizer Screw = 2-56 thread by 0.250

I saw that post by Blue Line Gear. Does that mean that the clip screw is also 2-56 thread by 0.1875?

1SHOT1KILL · Aug 27, 2015

BBKoenigsegg said:
I saw that post by Blue Line Gear. Does that mean that the clip screw is also 2-56 thread by 0.1875?

Not sure now. I'd wait for the knife and check.

BBKoenigsegg · Aug 27, 2015

1SHOT1KILL said:
Not sure now. I'd wait for the knife and check.

Yeah, that's what I'm going to do. Thanks for the help, 1SHOT!

BBKoenigsegg · Aug 31, 2015

Just found out that both the clip screw of my SMF and the body screws of the ZT 0560 fit in the PT clip perfectly. Thanks again, 1SHOT. To anyone who may read this in the future, if you need a PT clip screw, don't be afraid to contact me... I have a ton of 0560 body screws!

Mark1963 · Mar 16, 2019

Hi Guys
I lost 2x SMF screws during hunting/fishing trip last year (you know the ones on the handles)
I search replacement screws since then and NO luck ?!?!
I contacted Mick and NEVER EVER received any answer from him or strider knives website !
I searched / asked in ALL my hardware local stores with NO luck !!!
no need to explain how piss off im am...
from what i have read here i need : 6-32 thread 0.430 long and a head 0.258 in diameter and 0.075 thick. Driver size is T-10 Torx.
did someone here have couples of theses available for sale ?
PLEASE i really need your help here guys !