- Joined
- Feb 6, 2011
- Messages
- 4,309
The Tali WhackaGanzaaaaa will be April 25th 2013 between 9:00-10:00 pm Eastern Time. If the forums are shut down due to an overload in traffic, as has happened in past Extravaganzaaaas. . . I will continue to attempt posting the "Go" thread until I am able to get through on one of the 4 Busse Knife Group forums.
1) http://www.bladeforums.com/forums/forumdisplay.php/713-Busse-Combat-Knives
2) http://www.scrapyardknives.com/ubbthreads/postlist.php?Cat=0&Board=Knives
3) http://www.swampratknifeworks.com/ratchat/
4) http://www.bladeforums.com/forums/forumdisplay.php/778-Swamp-Rat-Knives [/SIZE]
Specifications
Blade Thickness: 3/16"
Blade Length: 7 1/4"
Overall Length: 12 1/2"
Blade Width: 1 1/2"
Grind: Saber with Chisel Tip
Finish: Hand Applied Satin Finish
Handle: Black Resiprene C
Steel: SR101 58-60Rc
Limited Edition: Serial Numbered
Price: Regular Price of $258.95 Special price if ordered within one hour of the "GO" thread being posted $198.95. All orders received after that will be charged at the regular price of $258.95.
EMERGENCY BACK-UP Plan!!!!!. . . If the forum shuts down and I am unable to post, or you cannot get on to see whether or not the "GO" thread has been posted, we are implementing an emergency back-up plan that consists of an automatic "GO" at 9:55 pm Eastern! Your email can not be marked any earlier than 9:55 pm Eastern unless I am able to post the "GO" thread before that time. . . . If the automatic "GO" is used then ALL EMAILS MARKED 9:54 pm or earlier will be put at the end of the line!!!!. . . So, be careful not to jump the gun boys!!!
1) We need to know the total number of Taliwhacker LE’s that you wish to order.
2) You must include your Forum name and your REAL name and address as well as phone numbers and any other pertinent info that we may need in order to contact you for payment and shipping info.
3) Email both Lexi at lexi@bussecombat.com and Jerry at jerry@bussecombat.com AFTER the "GO" Thread is posted by me on one of the Busse Knife Group Forums.
********WARNING!!! The INFI HOGs are a treacherous group and are not to be trusted!!! They will post under names that look similar to mine (Be sure that it says "Moderator" in red under my name if it is on Bladeforums) and they will bring up MANY false threads from the past in order to get others to order BEFORE the actual BladeShowGanzaaa GO THREAD!!!! DO NOT fall for this as so many have in the past and be left out in the cold.********
4) Orders are taken in the order in which the emails hit our inbox.
5) Serial Numbers: Serial numbers will be assigned in the order in which the emails are received. (Not in the order in which you post a response to the "GO" thread)
6) Delivery: Delivery of the first batch will be in a blistering 2-3 weeks from the last day of ordering with many of the earliest orders going out first.
7) Payment: You will not be charged until prior to delivery. However, you can divide your payments into 3 monthly installments beginning at the time of placing your order of approx $71.30 each, if you prefer.
**** Important Note: Those who intentionally overload their order request and then cancel most or part of their order AFTER notifications have been sent out, will lose their place and be put at the end of the line, where they may or may not get any of their requested knives. "Order loading" causes innumerable problems for our office. *******
We will need a few days to sort this thing out. Do not expect any notifications to be sent out for at least a week.
So, rev up your mouse and get ready for a Ganzaaaaa of Taliwhacker proportions!!!!
Good luck everyone . . .
Pokey
1) http://www.bladeforums.com/forums/forumdisplay.php/713-Busse-Combat-Knives
2) http://www.scrapyardknives.com/ubbthreads/postlist.php?Cat=0&Board=Knives
3) http://www.swampratknifeworks.com/ratchat/
4) http://www.bladeforums.com/forums/forumdisplay.php/778-Swamp-Rat-Knives [/SIZE]
Specifications
Blade Thickness: 3/16"
Blade Length: 7 1/4"
Overall Length: 12 1/2"
Blade Width: 1 1/2"
Grind: Saber with Chisel Tip
Finish: Hand Applied Satin Finish
Handle: Black Resiprene C
Steel: SR101 58-60Rc
Limited Edition: Serial Numbered
Price: Regular Price of $258.95 Special price if ordered within one hour of the "GO" thread being posted $198.95. All orders received after that will be charged at the regular price of $258.95.
EMERGENCY BACK-UP Plan!!!!!. . . If the forum shuts down and I am unable to post, or you cannot get on to see whether or not the "GO" thread has been posted, we are implementing an emergency back-up plan that consists of an automatic "GO" at 9:55 pm Eastern! Your email can not be marked any earlier than 9:55 pm Eastern unless I am able to post the "GO" thread before that time. . . . If the automatic "GO" is used then ALL EMAILS MARKED 9:54 pm or earlier will be put at the end of the line!!!!. . . So, be careful not to jump the gun boys!!!
1) We need to know the total number of Taliwhacker LE’s that you wish to order.
2) You must include your Forum name and your REAL name and address as well as phone numbers and any other pertinent info that we may need in order to contact you for payment and shipping info.
3) Email both Lexi at lexi@bussecombat.com and Jerry at jerry@bussecombat.com AFTER the "GO" Thread is posted by me on one of the Busse Knife Group Forums.
********WARNING!!! The INFI HOGs are a treacherous group and are not to be trusted!!! They will post under names that look similar to mine (Be sure that it says "Moderator" in red under my name if it is on Bladeforums) and they will bring up MANY false threads from the past in order to get others to order BEFORE the actual BladeShowGanzaaa GO THREAD!!!! DO NOT fall for this as so many have in the past and be left out in the cold.********
4) Orders are taken in the order in which the emails hit our inbox.
5) Serial Numbers: Serial numbers will be assigned in the order in which the emails are received. (Not in the order in which you post a response to the "GO" thread)
6) Delivery: Delivery of the first batch will be in a blistering 2-3 weeks from the last day of ordering with many of the earliest orders going out first.
7) Payment: You will not be charged until prior to delivery. However, you can divide your payments into 3 monthly installments beginning at the time of placing your order of approx $71.30 each, if you prefer.
**** Important Note: Those who intentionally overload their order request and then cancel most or part of their order AFTER notifications have been sent out, will lose their place and be put at the end of the line, where they may or may not get any of their requested knives. "Order loading" causes innumerable problems for our office. *******
We will need a few days to sort this thing out. Do not expect any notifications to be sent out for at least a week.
So, rev up your mouse and get ready for a Ganzaaaaa of Taliwhacker proportions!!!!
Good luck everyone . . .
Pokey
Last edited:
:thumbup::thumbup: