Tenacious pocket clip screws

S

savanna

Joined
Mar 5, 2007
Messages
96
I want to change the pocket clip position on my tenacious. Are these screws hex or torx? Thanks
 
You should be able to tell just by looking at them. torx are star shaped, hex are hexagon shaped.
 
They're 1.5 mm hex. I just checked. If you get a metric wrench set (around 5-6 dollars) you can use the 2 mm wrench to adjust the pivot on your knife, too.
 
The clip screws on mine are T-6 Torx.

Paul
bar_02.gif

My Personal Website ---- Beginners Guide to Spyderco Collecting ---- Kiwimania ---- Spydiewiki
Dead horses beaten, sacred cows tipped, chimeras hunted when time permits.
WTC # 1458 - 1504 - 1508 - Never Forget, Never Forgive!
It's easy to grin when your ship comes in and good fortune and fame are your lot, but the man worthwhile is the man who can smile with his shorts twisted up in a knot. - Morey Amsterdam
 
Thanks Frostyfingers. I can normally tell by looking at a screw,but the old eyesight aint' what it used to be. Guess I just need to take the wife's advice and get glasses,or a magnifying glass!! Thanks again.
 
Hey Deacon. Yeah the 6T will work, but there is a litttle slop in the fit and I did'nt want to booger up the head of the screw.
 
Make sure you use the correct size hex as those screws are notorious for stripping due to people trying to use the wrong size/style.
 
You must log in or register to reply here.
Back
Top