The Last Frontier Hunter and a contemporary ulu

Mark Knapp

Mark Knapp

Joined
Dec 20, 2009
Messages
4,421
Hi everyone, happy forth of July to all of you.

Here are a couple I recently delivered. The first is one I call the Last Frontier Hunter, it has a handle of mammoth tooth, ancient walrus ivory, musk ox horn and blue mammoth ivory. The 5 1/2 inch blade is of 1095 and 15N20 and was forged to shape. The overall length is about 10 inches.

lastfrontierhunter.jpg

clos-up.jpg


This one is a contemporary twist on an ancient design, an ulu with a blade of 1095 and 15N20 and a handle and stand of gimlet wood in-filled with lapis lazuli and gold leaf.

ulu.jpg


Thanks a lot for looking, please let me know what you think. Mark
 
Psychedelic man! You sure can mix up some materials and colors. Love the warmth and glow of all those ivories, teeth, fossils and bones together. And not a straight line joining any of the laminates. You're one crazy crafty guy! How do you get all those disparate materials to hold together without drift?

Love the lapis and gold on the stylized ulu. You do love exotic looks. I've always been fascinated with the "woman's knife," but have never been able to figure it out much, I mean it usability. I know its a dynamo in the right hands though!

Looks like you've put that engraver to good use!
 
Thanks a lot everyone.

Phil, the key to getting all those disimilar materials to stay together without too much drift is long curing times between each phase of construction. Many people understand that natural materials need time to cure before they are used. But what many makers don't realize is that materials need time to normalize after you change its shape. There are internal stresses in all natural materials so when you remove some of it, you are relieving stesses, you are also exposing new surfaces to the environment, where they will absorb moisture or dry more. Materials need time to adjust.
It's not good enough to just let material cure for a year in large block form, say a whole musk ox boss. It needs time to cure after it is roughed to handle size.
I build handles in sub-assemblies and allow them time to cure as well as allowing the assembled knife to cure before it is finished to shape. I also do not deliver a knife as soon as it is finished to allow it time to move in my shop if it is going to. I do final finishing sometimes a couple monthes after the knife is "done" The whole thing takes me about a year to build the knife even if I am not back-logged. The nice part about it is, I can rough in the handle materials and cure sub-assemblies while my customer is waiting for his name to come up.
Sometimes things still move after all these precautions, it's just the nature of the beast. I have learned some tricks to keep it to a minimum and have a return rate of way below 1%. I am always happy to make a knife look new again if anything should happen.
 
Mark, that ulu is really remarkable. I've always thought of the ulu as a piece of native art. But this, well, it lights me up when I look at it, it's just beautiful!

Bob
 
Mark Knapp said:
Thanks a lot everyone.

Phil, the key to getting all those disimilar materials to stay together without too much drift is long curing times between each phase of construction. Many people understand that natural materials need time to cure before they are used. But what many makers don't realize is that materials need time to normalize after you change its shape. There are internal stresses in all natural materials so when you remove some of it, you are relieving stesses, you are also exposing new surfaces to the environment, where they will absorb moisture or dry more. Materials need time to adjust.
It's not good enough to just let material cure for a year in large block form, say a whole musk ox boss. It needs time to cure after it is roughed to handle size.
I build handles in sub-assemblies and allow them time to cure as well as allowing the assembled knife to cure before it is finished to shape. I also do not deliver a knife as soon as it is finished to allow it time to move in my shop if it is going to. I do final finishing sometimes a couple monthes after the knife is "done" The whole thing takes me about a year to build the knife even if I am not back-logged. The nice part about it is, I can rough in the handle materials and cure sub-assemblies while my customer is waiting for his name to come up.
Sometimes things still move after all these precautions, it's just the nature of the beast. I have learned some tricks to keep it to a minimum and have a return rate of way below 1%. I am always happy to make a knife look new again if anything should happen.
Click to expand...


A man who knows his materials... Well done!!
 
Mark,

Not many knife makers achieve a style all of there own and you are one. I always enjoy seeing your work & thanks for posting.

Well done!

Gary

Gary
 
What a stunner of a hunter, beautiful..........not just beautiful - looks like it'd be a real good user, most comfy in the hand too.

- congrats!
 
You must log in or register to reply here.
Back
Top