Torx size for Hinderer XM18 3 inch?

[rutmi01]

Do any of you Hinderer fans know of the torx size the pocket clip on the 3 inch Hinderer uses? I have an armorer's tool kit, but the torx bit is too large.

Also, does anyone know what angle Rick sharpens his XM-18s at?

Thank you for any help you can provide.

 

[tique]

The clip screws are .050 allen, not torx.

Not sure on the edge angle... curious about that myself.

 

[rutmi01]

Great thanks for the tip tique.