USGI Poncho QTR (Quick Tarp Rig) for hammock

Joined
Mar 26, 2002
Messages
4,940
Today I rigged up a new suspension with for my ENO Doublenest. We are expecting light rain tomorrow night so I figured I would work on an expedient tarp with my handy UGGI Poncho. Here is what I used-

50 feet of blaze orange parachute cord
4 feet of heavy duty elastic
4 tarp clips
4 tent stakes

First I put up my tarp line and secured it. Next I put the poncho on the line like a diamond to place an eyelet in line on each side of the line. Then I secured one end with a modified hangman noose using the left over from the original line. Then using another three foot piece of paracord I did the same on the other end and pulled it taught.

I then cut (4) four foot piece of paracord and tied it to the top of my tents stakes an then made a figure 8 knot on the other end making a loop. Then I cut (4) one foot pieces of elastic and tied it through the tarp clips. After affixing the tarp clips to the poncho I joined the elastic and paracord on the tent stakes and drove them into the ground. Done.

tieout5.jpg


tieouts.jpg


tieouts3.jpg


tieout4.jpg


tieouts2.jpg


tieout6.jpg


I was amazed with how easy this was to do and how much the poncho stretched. I don't want to hit any trails with the poncho, but I learned a lot and now I am looking for a proper tarp.- George
 
Nice set up. I think them clip type things look pretty cool that you have on your poncho.

Cool pics too.

Bryan
 
Funny you ask, they look like knitting needles but they are actually tent stakes I picked up at Gander Mountain. They look like nails and you tie cord through the top. I really like them. Glad you like the set up, I just like to fiddle with stuff.- George
 
Cool. Ill be up by Gander Mountain(Chicago) in a few weeks, Ill have to stop in and check em out.
 
Back
Top