Victorinox- any other corkscrew accessories?

S

ShawDAMAN

Joined
Jun 9, 2011
Messages
112
Hey. Many of you are probably familiar with the corkscrew mini screwdriver accessory offered by victorinox...

opplanet-victorinox-mini-screwdriver-accessories-30411.jpg


Obviously it resides inside the corkscrew (on such models that have it) and gives you an additional handy little driver for eyeglass repairs and whatnot. Since this is such a good idea I am wondering if victorinox (or another after market company) has devised any other corkscrew attachments for the Vic SAK's?? I can think of several good ideas already...
 
as far as i know, the mini glasses scredriver is the only optional device that could ride on the corkscrew...

yup, it would be a GREAT idea to have other options for the corkscrew... good thinking shaw!
 
Underneath the corkscrew when you lift it up there is a hole between the scales & liner where a stainless steel pin can go. On my Cybertool the pin is standard, but on my Ranger and Explorer there is no pin, but the hole is still there - I'm going to get some Victorinox stainless steel pins and add them to my Ranger & Explorer, I think those pins are useful tools.
As far as within the coils of the corkscrew itself - I have never heard of anything available apart from the Victorinox eyeglasses screwdriver (which I will also add to my Ranger & Explorer).
 
Thanks guys for your thoughts. Yes I notice that little pin hole on my huntsman. Maybe I'll get one too.

I was thinking they could offer a small corkscrew pen, or maybe make it reversible with a small phillips on the opposite side, lots of possibilities. Oh well. There didn't seem to be anything else but I wanted to make sure I wasn't missing anything ;)
 
I don't use an official Victorinox straight pin. One of those pins that sometimes come in new shirts works just fine.
 
L. Richard said:
I don't use an official Victorinox straight pin. One of those pins that sometimes come in new shirts works just fine.
Click to expand...

That's what I was going to do, but I've ordered a kit with eyeglasses screwdrivers, SS pins, tweezers, scissor springs and one or 2 other bits - I'll use those to add eyeglasses screwdrivers & stainless steel pins to a couple of SAKs and the rest will be spares for anything that gets broken or lost.
 
You must log in or register to reply here.
Back
Top