Washer Order?

PeteyTwoPointOne

PeteyTwoPointOne

Platinum Member
Joined
Jun 10, 2014
Messages
8,046
just tore down, stripped & buffed out an old AK47 with axis lock...it has teflon & bronze washers

My questions:

What order do they go back in? Does it matter?

I laid them aside and didn't take pics during teardown cause I got so zen enjoying the mechanics and going thru the handwork process...they are marvels of knife engineering! Thanks in advance! :)
 
Unless you have an Ultimate Hunter. The washers actually extend beyond the blade tang, and into the Triad cut out. Chewing up of the Teflon washers is ensured. I actually flipped mine so that the Teflon was against the G10, after 2 sets of Teflon washers got shredded up. Major design flaw.
 
ursamajor said:
Unless you have an Ultimate Hunter. The washers actually extend beyond the blade tang, and into the Triad cut out. Chewing up of the Teflon washers is ensured. I actually flipped mine so that the Teflon was against the G10, after 2 sets of Teflon washers got shredded up. Major design flaw.
Click to expand...
I HAVE THE SAME PROBLEM WITH MY HOLD OUT II. WHERE CAN I PURCHASE NEW WASHERS? WHAT SIZE ARE THE WASHERS? THANKS! 22jaymondo@gmail.com


Sent from my 5054W using Tapatalk
 
ursamajor said:
Unless you have an Ultimate Hunter. The washers actually extend beyond the blade tang, and into the Triad cut out. Chewing up of the Teflon washers is ensured. I actually flipped mine so that the Teflon was against the G10, after 2 sets of Teflon washers got shredded up. Major design flaw.
Click to expand...

Would all the Ultimate Hunters be like that or only a few? Does it work smoothly and reliably after your mod?
 
You must log in or register to reply here.
Back
Top