Whatcha YOU got...?

crazy nicky

crazy nicky

BANNED
Joined
Jun 14, 2002
Messages
609
In my few years (23) I have collected knives...for about as long as I can remember I always had a blade! Since that first jack knife my dad gave me to Christmas when I was 8 getting my Swiss Army Tinker...then when I was 13 I got my first balisong at the Mass. Merchandise Mart in Lynn,Ma for 10 bucks and as **** load other ****** knives from there as well!lol I was just amazed at how many blades I have collected over the years when I cleaned my room and there aren't that many I like. My favs and what are my usual carry knives. SO what have you guys been sporting around these days??? I usually carry these... NOT all at once! You got to switch it up with your attire...lol


Gerber Mark I

Gerber Guardian

Al-Mar SERE 2000

CRKT Carson neck knife

and my trusty Gerber Multi 800!
 
Right now it's:

Buck Strider 1st prod run tanto
BM43 with heat anodized handles
BM722
 
Here's what I have :

Ed Fowler MS Pronghorn
Jay Hendrickson MS hunter (once owned by Dennis DesJardin)
Small Utility by Rick Fowler
Spear point hunter by Rick Fowler
Utility knife by Joe Cordova MS
Automatic folder by Steve Jernigan
2 Mini Randall 1 (consecutive number)
Mini Randall 3
Randall 15 fully loaded
Randall 10 3" w/ stunning red micarta
Mardi Gras by William Henry
Lancet with MOP handle and damascus blade by William Henry
Little damascus neck knife by Bruce Evans
Dalton Holder early knife
Arno Bernard small utility w/boar tusk
Chris Reeve Umfaan
2 Chris Reeve small sebenza (BG-42)
Assault Shaker (Busse)
One Thailand folder w/ ivory handle
Robert Washburn JS buffalo hunter
Gemini balisong (#14) - Darrel Ralph
Dobruski balisong
Benchmade 43 DM
BM 46-01
2 Tachyon
1 Taylor balisong
Carved handle Vanturi balisong (Darrel Ralph)
Kersaw Chive
Microtech UDT (early - 1995)
Microtech nemesis
William Henry black and tan lancet
BM 43
2 BM 42
Lawrence fixed blade from railroad spike (neat stuff)
Charlie Ochs MS utility knife
A couple of antique japanese swords

I think there some other knives 'hidden' in somewhere....

There are no such thing as 'too many knives' !!!!!!
 
Ohhhhhhh, I thought this was another "What are you carrying today" thread.
 
Hi,
4 knives and a tool, no prob you should carry them ED!

:D

I choose my EDC from this knives:
www.bigboresmesserseite.de
(klick for "Messer" than for "Customs" or "Serienmesser" ) :D

usually about 2 to 4 ED.


(THX for making me counting them,)

i found about 18 Customs, and 60 factory knives,

32 are folders, the rest fixed.

Some you may not call knives, but i do. :cool:











.:D
 
Don't get me wrong I have hundreds of blades... those four are the only ones I have been carring as of late...
 
Not enough time to go into what I have. So, will only entertain what my EDC's are. . .

- Microtech UT-6
- Mad Dog ATAK II
- CRK Sebenza ( large plain )
- Jason Jacks Tactical
- Benchmade 690
- Microtech LCC DA
- DDR EDC
- Microtech SOCOM MA
- Chew Covert
- DDR Kit Knife
- Kershaw Double Cross
- Microtech SOCOM DA
- Dubruski Atlantis
- Kershaw Random Task
- Emerson CQC-7A
- Strider DB
- Microtech Amphibian
- JSP Arch Angel 2
 
I realize this may be heresy, but . . .

I probably have about 200 knives, but after losing a couple of expensive knives, my practice is not to carry anything on a day-to-day basis that is either expensive or hard to replace. My job also requires me to go through metal detectors several times a day, so I also have to carry something that looks ordinary enough to pass scrutiny. Right now I usually carry two CRKT KISS folders; when I'm on my bike I carry a folding REKAT clipped to my inside vest pocket, a Gerber Multi-tool in my leathers, and an older Cold Steel San Mai folding tanto on my belt in a snakeskin sheath -- this is mostly for show, to keep attention off the REKAT in my vest.
 
For EDC, excluding fishing, hunting, camping, and those in the display case.

MT UT6
BM 31 bali
Kershaw Random Task
Kershaw Mini Task
Woodard Fer de Lance
Chew Covert Spitfire
Hubertus Stag auto, bottle cap opener release.
 
My usual EDCs (work and non-work):

Military PE
Endura SE
Native 35/65
Lum Chinese PE
Calypso Jr. PE
Spydercard 50/50
Jester SE

And for multitool; my SOG TiNi Powerlock. :cool:
 
What the hell, I'll play....

Lately it's been:

*Snody Resistor in blue and black G-10, with an S30V blade
*Duncan Whiplash in desert tan G-10, with Snody Sharpfusion blade
*WH Lancet in carbon fiber and handrubbed ATS-34 (for those dress-up days)

Later.
 
I like these threads. It's a good way to take inventory.

FIXED
Busse Steel Heart-E
Fallkniven A-1
Becker BK9
Frosts Mora
Cold Steel Terminator
S&W boot knife
Explorer Survival II
old Case stag handle

FOLDER
Al Mar SERE 2000
Benchmade 710 HSSR
CRKT M-16-04
Spyderco Endura II
Spyderco Delica
Opinel #9
Pacific Cutlery Balisong (Int'l series)

SLIPJOINT
Schatt & Morgan Swaybelly Trapper
Queen D2 large stockman Cocobolo
Case Trapper stag
Henckels stockman

MULTI-TOOL
Leatherman ST200
 
I have been carrying a frame lock Boa at work since the beginning of July, I am very impressed with it so far. Speed-Safe is addicting!
 
My EDC's are rotated among the following:

DDR Bullnose Maxx
MOD Tempest
BM 735
BM 942
ProTech TR1
BM 42 Bali
WH Lancet - Rosewood
WH Lancet - Bone/Sterling/Sapphire TS
Easler Slipjoint
Victorinox X-Tool
Dalton Companion
Dalton M9
Kershaw Chive
EK Raven
EK CQC7
 
Before finding BF.

2 SAK's
Enudra
Opinel folder
2 rusty Impirial pocket knives

After about two months here.

Camp Tramp
Arclight
AB stilleto
BM 42BLK
Vaquero Grande
SERE 2000

I love the all, well the camp tramp is special.:)
 
My favourite knives:

FK2.jpg
 
Then I got to thinking and counting and realized that it wouldn't take long or much space!:eek: Here we go;

CUSTOM:

...Crawford KFF, with anodized ti handles and satin blade. A real beauty.
...Crawford KFF, with black blade and full black micarta slabs. My newest one so my edc as of now.
...Carson large model 16, built with ti bolsters and green/black G-10 handles. 4" fighter style blade. Smoothest opening of all.

Have a Carson Vanguard E&E that should be ready in the next 2 weeks.

PRODUCTION:

...Sebenza, large Classic w/bloodwood inlays and S30V steel
...Sebenza, large Classic w/rosewood inlays and S30V steel
The ultimate.........production or custom!!!
...Buck Prince
...Spyderco Toad
...Gerber Yari
...Pack River Camp Knife

AUTOMATICS

...Protec GodFather, grey anodized frame and G-10 inserts, black blade


I have a few other odds and ends also.

As you can see most of my knives make it into edc service eventually. Although some stay longer than others.
 
Can't think of them all but these are what stick out most right now
Folders
G10 Police
AFCK
CQC7
Gunting
Endura
Tomcat
Kershaw small liner and black colt
M16
KFF Pro
Big Spender
Pardue 350
Chive


Fixed
Nimravus
Silver Stag
Ka-Bar
EKI La Griffe

I know I have more. This should probably motivate me to do a count and update myself on what I actually have. It's kind of a waste that I don't use them all actually. A lot of them are NIB.

Of the lot my EDC's include the AFCK, La Griffe and Endura.
The others make into the rotation once in a while but usually my AFCK is the one that sees the most use.
 
You must log in or register to reply here.
Back
Top