Which Special Edition Sebenzas Can Be EDC And Which Should Not Be?

B

bvo85

Joined
Apr 27, 2017
Messages
466
Long time CR fan and am considering getting one of the special edition sebenzas of some kind. Whether it be graphic or inlaid materials. In reading some of the threads here, it seems that CR may not be able to refinish all types of special editions. Also, I've read some of the materials tend to scratch or scuff easily, like mammoth ivory.

If my goal is to have a special edition sebenza that I can both admire and occasionally EDC, which materials/versions would allow for that with minimal risk of damage to the knife, and which should be avoided?
 
Micarta inlay.... great tactile feel, good for EDC, easily resold here and the only inlay that CRK refinishes for free.
 
They all can be EDCed if you want to. Some are going to scratch, and some are not going to take the same abuse as a plain Jane. Obviously mammoth isn't as strong as ti, but that doesn't mean you can't carry and use it-just don't smack it on hard objects (makes a nice gents knife IMO). As stated above the micarta is bullet proof and can be fully refurbished(only inlay that can be fully refurbished-it can be re-blasted with inlays in , wood & mammoth can not be refinished by CRK). They can do a decent job of refurbishing UC's and CGG's but can't take out deep scratches.
I feel it is best just to accept life's beauty marks , carry what you want and don't worry about it. There are none I wouldn't carry if I liked it enough. I like to enjoy my knives and don't worry about what they may sell for down the road.
 
How is the micarta inlay secured into the titanium handle? Is it glued in, or secured with fasteners? I don't plan on soaking a sebenza in water for long periods of time, but wondering if there is glue, could it possibly come out from repeated water exposure.
 
bvo85 said:
How is the micarta inlay secured into the titanium handle? Is it glued in, or secured with fasteners? I don't plan on soaking a sebenza in water for long periods of time, but wondering if there is glue, could it possibly come out from repeated water exposure.
Click to expand...
The number of reports on this forum of inlays falling out is essentially nil. It's a reasonable statement to say it doesn't happen. The 3M VHB product they use to secure them is the same they use to stick the wings to a 777 :D. Sticky stuff, even when soaked in water. No worries there.
 
They use 3M Very High Bond tape (or ultra high bond?). Absolutely nothing will interfere with that.
 
You can carry any and all of them! They won't sell for as much should you choose to pass them along at some point, but if you're looking for something special to have in you're pocket, why not?

Here are a couple that I've carried for years - the mnandi was carried prior to me coming into possession of it.


rEwOpYvl.jpg


pUzDFEll.jpg
 
I'm sold on the micarta version! Did CRK ever make micarta inlay sebenzas without "Made in Idaho" stamps or are they all post-Idaho stamp? Nothing against being proud of being American, but I prefer the sleeker look of unmarked.
 
Really want to EDC my new acquired Large BG-42 flat grind,signed by CR, but still not sure all the way :).
IMG_2229.jpg
 
ganagati said:
You can carry any and all of them! They won't sell for as much should you choose to pass them along at some point, but if you're looking for something special to have in you're pocket, why not?

Here are a couple that I've carried for years - the mnandi was carried prior to me coming into possession of it.


rEwOpYvl.jpg
Click to expand...

Please pack that Mnandi up and send it to me! :D
 
I don't see a problem with edc'ing a graphic Sebenza if that is the direction you want to go. The raw blasted titanium would be easier to scratch than the satin graphic
 
bvo85 said:
What is the meaning of "flat grind"? Can you show an example of each?
Click to expand...
Picture8.png


The image above gives an approximation. The difference between these and a pocket knife will be that rather than squaring off at the top, the material will get wider as it approaches the spine.

Flat grind means the blade is flat. It's stronger, but becomes awkward as you wear it down from years of sharpening. The hollow grind will maintain the original profile better as that occurs.

Also, i would think the hollow grind is a better slicer, as you have less material passing through your object. A flat grind would be better at chopping.
 
Thanks for clarification! So most CRK are hollow ground except for a handful of rare ones that CR himself did a flat grind?
 
rexromic said:
Really want to EDC my new acquired Large BG-42 flat grind,signed by CR, but still not sure all the way ]
Click to expand...
I am sure it would make a great EDC, but understand the problem deciding . Not every knife has to go into the rotation, some can stay in the collectables section. IMO. I have a couple I haven't pulled the trigger on myself-but maybe one day.
Not saying this should be your criteria , but- In making such a decision I try to determine if the knife would really make it into the long term rotation, or would I just be scratching up a collectable then putting it back in the drawer for something else. I have no problem carrying a high priced knife if that pleases me, but I am not out to devalue my knives if I get no gain from it.
 
Last edited:
You must log in or register to reply here.
Back
Top