Will a NMSFNO fit in a large Special Ops Sheath ?

[EAGLE1028]

I need some fellow HOG help. I am thinking about grabbing a NMSFNO and wondered if it will fit in a large Special Ops sheath. I know that it is possible to remove the bottom screw holding the liner in and securing the liner with PVC glue. Has anyone attempted this with their NMSFNO ?

Thank you

EagleHog

 

[fbusmc]

you will have to do the oven thingy. look in the sticky post for instructions.. it is long enough, but not wide enough.. oven at 375 for 4 min. use three layers of duct tape on both edges. lots of soapy lube.. then shove blade down in and slide in and out until the plastic sheath cools... I've done it with an ASH1 in a small spec ops and a FSH in a large spec ops... works great.

 

[barrabas74]

Thanks for that fbumc, I too was thinking bout this for my NMSFNO. I have one for my ash-LE in a small but just cut away some plastic.

 

[EAGLE1028]

Thank you for the info. I have a TG coming soon and have a spare large Spec Ops Sheath waiting.

 

[silverdragon33]

yeah, what fbusmc said.
it reaches almost all the way to the end of the liner, and you will have to take the screw out and use zip ties or something, but it works fine