Will the Charge extended bit kit replace my BM Blue box?

[medusaoblongata]

Leatherman sells an extended bit kit which has more bits than what comes with the Charge. Are there torx drivers in that extended kit that will replace my BM blue box (which has all the torx drivers I've needed for any knife, by any company)?

I'm sure someone here will know.

Thanks.

 

[JoeBW]

Here you go.

Bit Kit
The Bit Kit expands your driver's capabilities with 42 tool steel bits. Use with your Surge, Charge AL, Charge ALX, Charge TTI, Wave or the Removable Bit Driver. Nylon belt sheath included.

Included bits:
Hex 1.5mm and 2mm
Hex 2.5mm and 3mm
Hex 4mm and 5mm
Hex 6mm and 1/4"
Hex 7/32" and 3/16"
Hex 5/32" and 9/64"
Hex 1/8" and 7/64"
Hex 3/32" and 5/64"
Hex 1/16" and .050"
Robertson #3 and #2
Robertson #1 and Pozi
Pozi #2 and #1
Torx #10 and #15
Torx #20 and #25
Torx #27 and #30
Phillips #0 and #3
Phillips #1 and #2
Slotted 3/32" and 1/8"
Slotted 5/32" and 3/16"
Slotted 7/32" and 1/4"
Phillips and Flat Tip Eyeglasses Screwdriver

Hope this helps. For more info, go to the Leatherman site and poke around under "accessories" (listed on the top of the page).

Best - Joe

 

[supratentorial]

The selection of bits in the two kits doesn't overlap completely. The Leatherman kit lacks #6, #7, and #8 torx bits.

"Benchmade uses six lobe, torx-like headed screws exclusively throughout the assembly of our knives. This engineered screw style offers a more "controllable" means of achieving tightness. Occasionally you may want to adjust blade tension, remove the carry-clip or simply tighten any loosened screws. So now we offer the The Bluebox for those purposes. Kit includes bit sizes- 6, 7, 8, 10, 15, one phillips head bit and bit holder/extension all self-contained in a molded plastic case which doubles as the handle. Features removable plastic carry-clip on case."