- Joined
- Nov 8, 2009
- Messages
- 1,533
(10 availible) These have been so popular with my customers that I am making some extras for sale by themselves. These are of my design and make, made by hand in my shop, from U.S.-produced black .093" virgin Kydex (not re-melted V-grade). These are tensioned to spring shut firmly and have “barbs” that catch on a belt or waistband seam, etc, to anchor them firmly in place. The function is similar to the Blade-Tech Tech Clip or Spyderco's G Clip. I have improved my forming process and the spring action on these is tight and consistent. The original ones were made from .080", which functions well for small-med size knives. The .093" material is stiffer and is sufficient for large knives and other heavier objects but are only availible in black (a green one is shown in the pic, unfortunately most of the colors are only availible in .080" material).
The mounting slots are vertically spaced to fit any sheath that accepts a large Tek-Lok, and up to 2-1/8”. Horizontal spacing is 1-9/16".
Provides more carry options than I can really list. Belt (inside or out), waistband (inside or out), boot top, pocket top, etc. Can be inverted to hang from the top of coveralls, etc. A certain lady I know carries a small knife/sheath with the clip inverted, hooked over her bra strap under her arm. Perfect for low-profile or concealed carry .You can pop it on or off in about a second, just pull the tab out and slap it on where you want it.
These work for knives, flashlight holders, cell phone holders, and a multitude of other personal items/gear. I do not recommend these for carrying a firearm (A rigid and secure closed loop is best for things that go bang) but they should work for just about anything else you can attach them to.
Mounting slots are spaced 1-9/16" (width) and 1-1/4" to 2-1/8" (length) on center and are sized to accept standard sized screw posts (Chicago screws). Overall dimensions are 2-3/8" (wide) x 3-3/8" (length), fits up to 1-3/4" belt, strap, etc.
6.00 $ each plus shipping without mounting hardware, 5.75$ each for orders of 5 or more. I can add mounting hardware for the first 5 sold, for an additional 1.25$ per clip (includes 2 screws, 2 screw posts, and 2 rubber spacers/washers, black). I do not currently have enough of the hardware on hand to include with all 10 clips. First Class shipping within the U.S. for up to 5 of these is usually under 3$.
The mounting slots are vertically spaced to fit any sheath that accepts a large Tek-Lok, and up to 2-1/8”. Horizontal spacing is 1-9/16".
Provides more carry options than I can really list. Belt (inside or out), waistband (inside or out), boot top, pocket top, etc. Can be inverted to hang from the top of coveralls, etc. A certain lady I know carries a small knife/sheath with the clip inverted, hooked over her bra strap under her arm. Perfect for low-profile or concealed carry .You can pop it on or off in about a second, just pull the tab out and slap it on where you want it.
These work for knives, flashlight holders, cell phone holders, and a multitude of other personal items/gear. I do not recommend these for carrying a firearm (A rigid and secure closed loop is best for things that go bang) but they should work for just about anything else you can attach them to.
Mounting slots are spaced 1-9/16" (width) and 1-1/4" to 2-1/8" (length) on center and are sized to accept standard sized screw posts (Chicago screws). Overall dimensions are 2-3/8" (wide) x 3-3/8" (length), fits up to 1-3/4" belt, strap, etc.
6.00 $ each plus shipping without mounting hardware, 5.75$ each for orders of 5 or more. I can add mounting hardware for the first 5 sold, for an additional 1.25$ per clip (includes 2 screws, 2 screw posts, and 2 rubber spacers/washers, black). I do not currently have enough of the hardware on hand to include with all 10 clips. First Class shipping within the U.S. for up to 5 of these is usually under 3$.
Last edited: