(1 left)7" Utility Knives in AEB-L

timos-

timos-

Knifemaker / Craftsman / Service Provider
Feedback: +9 / =0 / -0
Joined
Oct 22, 2012
Messages
2,164
If you are not satisfied you can return within 7 days for a full refund. Knife must be in original condition.
Both of these knives have a slight recurve edge with a deftly placed belly towards the tip. Makes fine detail work very efficient. I use this design for leatherwork. It is satisfying tool to have.

OAL=7"
Blade: Chisel ground 3" right side
Handle 4" Thunderstorm Kevlar and black G10
Fasteners:Naval Brass pins and West Systems Epoxy
Steel: .110 thick AEB-L hardened by Peters Heat Treat to RC 60-62
Honed on 4000/8000 grit water stone. Shaving Sharp
Price is 80 or 100 with leather pouch sheath Please give me a few days to make sheath. Let me know if left or righty.
DSCN0453.jpg
DSCN0454.jpg

DSCN0450.jpg
DSCN0451.jpg

DSCN0456.jpg
DSCN0455.jpg


OAL=7"
Blade: Chisel ground 3" left side
Handle 4" black g10 with white and red g10 liners
Fasteners:304 SS pins and West Systems Epoxy
Steel: .110 thick AEB-L hardened by Peters Heat Treat to RC 60-62
Honed on 4000/8000 grit water stone. Shaving Sharp
SPFPrice is 80 or 100 with leather pouch sheath Please give me a few days to make sheath. Let me know if left or righty.
DSCN0457.jpg
DSCN0458.jpg

20130720_091044_zps12af8d74.jpg
20130720_091144_zps6b62d5dd.jpg
 
Last edited:
I have a paring knife it came in a bar set I think its for cutting fruit for drinks? Its shaped just like that. In variably its the knife I always grab out of the drawer. Everytime I think man this is a very useful shape for a knife. So well done!
 
Tim, I would take the one with the black handle and leather sheath (black), if you would take postal money order. I on the field right now so I will be able to do some personal errands on monday. Pls send me your mailing address so I can send my pament.Thanks
Frank
 
Sure thing MChief , just enable private messages in your control panel so I can contact you or send me an email tim@blackstoneknife.com Would you like a left or right carry sheath?

Thanks Chavez! and akthor it really is a useful shape, id never used a knife with this blade shape before I made a few of these and I really like it.
 
Tim, got the knife and it was really impressive. The fit of the liners, handle scales and even the pins are perfect. The sheath with it was functional and great fit.
 
MChief, Glad you like it! I found that blade shape to be very useful, I am going to do a few more with variations on the handle shape.
 
You must log in or register to reply here.
Back
Top