Daado
Knifemaker / Craftsman / Service Provider
- Joined
- Apr 5, 2015
- Messages
- 2,244
I had a lot of fun making Kephart knife in Q4 build challenge
https://www.bladeforums.com/threads/shop-talk-q4-build-challenge-kephart-knife.1957154/page-2
and i had to do it again,
Forged from 52100 round bar with all of the tapers.
Flats are left raw, soaked in vinegar and wire brushed after forging.
After heat treatment, flats are brushed with scotch brite.
Bevels are made in satin finish with scotch brite.
Details:
Overall length - 10,25"
Blade length - 4,75"
Blade width - 1,1""
Thickness at the back of the spine -9/64" (3,5mm)
Tang tapers to - 3/64" (1mm)
The knife weights 6 oz and with sheath is 10 oz
Handle material: Walnut wood. black G10 liners, brass pins and lanyard tube.
Handmade 4mm thick (5/32") vegetable tanned leather sheath, vertical right hand carry.
Asking $145 priority int. shipping with tracking number included.
You can PM/email me: seckardalibor@gmail.com
PayPal ( seckardalibor@gmail.com ) accepted.
Thanks for looking.
Dalibor.
https://www.bladeforums.com/threads/shop-talk-q4-build-challenge-kephart-knife.1957154/page-2
and i had to do it again,
Forged from 52100 round bar with all of the tapers.
Flats are left raw, soaked in vinegar and wire brushed after forging.
After heat treatment, flats are brushed with scotch brite.
Bevels are made in satin finish with scotch brite.
Details:
Overall length - 10,25"
Blade length - 4,75"
Blade width - 1,1""
Thickness at the back of the spine -9/64" (3,5mm)
Tang tapers to - 3/64" (1mm)
The knife weights 6 oz and with sheath is 10 oz
Handle material: Walnut wood. black G10 liners, brass pins and lanyard tube.
Handmade 4mm thick (5/32") vegetable tanned leather sheath, vertical right hand carry.
Asking $145 priority int. shipping with tracking number included.
You can PM/email me: seckardalibor@gmail.com
PayPal ( seckardalibor@gmail.com ) accepted.
Thanks for looking.
Dalibor.
