- Joined
- Sep 10, 2010
- Messages
- 3,734
Up for grabs today are 10 Fell Beast Legacy Prime Prototypes in 52100 with DHT. Offering these for the ultra low price of $349 which includes a Taco style Kydex sheath and free CONUS shipping.
I firmly believe this is the most knife you can get for your money in 2024.
Payment via venmo, zelle, check, or USPS money order is strongly preferred as Payal holds my funds forever and takes a big fee. Sales are first come, first serve.
I have two of each of the following scale choices.
2X Bright Green Terotuff
2X Black/ Grey G10
2X Dark Grey G10 (appears black)
2X Black/ Blue G10
2X Back/ OD Green G10
Model: Fell Beast Legacy Prime Prototype
Steel: 52100 at 59RC with differential temper
Length: 24in overall
Blade: 18in
Thickness: .135 in
Weight: 28 ounces w/ G10, 26 ounces w/ Terotuf
Finish: machined bevels w/ scotchbrite finish
Price: $349 shipped CONUS Includes FREE taco style Kydex sheath
What are the differences between the new Legacy Prime model and the Classic Fell Beast?
1. A stock size increase from .110 to .135 for extra durability and chopping power
2. CNC machined bevels that are much thinner and higher than the original for extra deep bites
3. An updated handle that is slightly shorter and more ergonomic
4. A new differential heat treat that provides the best durability yet.
These prototype blades were made to test what is possible with bevel machining, as such the bevels and finish are not perfect. With these, we were able to get the bevels down to finished thickness and survive heat treat which is a game changer. However, we still have some work to do on the tooling to make the mill marks cleaner. Some of these are prettier than others but all of them will have some choppy areas where there was chatter on the mill.
A few things to note with these
1. I'm not marrying the tang to the scales at all. These fit perfect but the tang is not scotchbite finished because I don't want to damage the G10 or round off the edges and ruin the perfect fit.
2. There's a small nick in the spine on all of these from where they were fixtured on the mill
3. the scotchbite finish is not flawless, especially on the flats. There is quite a bit of variation
These blades are not perfect but they will make great users. The scales are compatible with future runs and because the tolerances are tight you can buy another set of scales and change them out easily.
The bevels are nice and thin and bite DEEP. I think you will be blown away with the sheer chopping power these things have. It will make your 12in bowie feel like a toy.
For pricing, because these are prototypes, I'm offering these at the lowest price point I possibly can and covering CONUS shipping.
So, If you want a Fell Beast you can really beat on and use hard at a pretty solid price point, I think this is the sale for you!
Final note, there are varying levels of oil on the blades which plays with the light but I promise these look great in person.
I firmly believe this is the most knife you can get for your money in 2024.
Payment via venmo, zelle, check, or USPS money order is strongly preferred as Payal holds my funds forever and takes a big fee. Sales are first come, first serve.
I have two of each of the following scale choices.
2X Bright Green Terotuff
2X Black/ Grey G10
2X Dark Grey G10 (appears black)
2X Black/ Blue G10
2X Back/ OD Green G10
Model: Fell Beast Legacy Prime Prototype
Steel: 52100 at 59RC with differential temper
Length: 24in overall
Blade: 18in
Thickness: .135 in
Weight: 28 ounces w/ G10, 26 ounces w/ Terotuf
Finish: machined bevels w/ scotchbrite finish
Price: $349 shipped CONUS Includes FREE taco style Kydex sheath
Info on the Model
What are the differences between the new Legacy Prime model and the Classic Fell Beast?
1. A stock size increase from .110 to .135 for extra durability and chopping power
2. CNC machined bevels that are much thinner and higher than the original for extra deep bites
3. An updated handle that is slightly shorter and more ergonomic
4. A new differential heat treat that provides the best durability yet.
These prototype blades were made to test what is possible with bevel machining, as such the bevels and finish are not perfect. With these, we were able to get the bevels down to finished thickness and survive heat treat which is a game changer. However, we still have some work to do on the tooling to make the mill marks cleaner. Some of these are prettier than others but all of them will have some choppy areas where there was chatter on the mill.
A few things to note with these
1. I'm not marrying the tang to the scales at all. These fit perfect but the tang is not scotchbite finished because I don't want to damage the G10 or round off the edges and ruin the perfect fit.
2. There's a small nick in the spine on all of these from where they were fixtured on the mill
3. the scotchbite finish is not flawless, especially on the flats. There is quite a bit of variation
These blades are not perfect but they will make great users. The scales are compatible with future runs and because the tolerances are tight you can buy another set of scales and change them out easily.
The bevels are nice and thin and bite DEEP. I think you will be blown away with the sheer chopping power these things have. It will make your 12in bowie feel like a toy.
For pricing, because these are prototypes, I'm offering these at the lowest price point I possibly can and covering CONUS shipping.
So, If you want a Fell Beast you can really beat on and use hard at a pretty solid price point, I think this is the sale for you!
Final note, there are varying levels of oil on the blades which plays with the light but I promise these look great in person.
