- Joined
- Jul 8, 2008
- Messages
- 1,079
Here is a nice full tang guardless knife for the guys that don't like hidden tangs or guards. im calling it the "bushcraft #!"
OAL- 8 1/8"
blade- 3 7/8" long, .093" thick at the spine, .040" measured 1/4" back from the edge, and .018" at the shoulder of the edge, 1" wide
steel- High Performance 1095, with in-house differential heat treatment which includes triple normalize, triple anneal, triple edge quench, and triple draw, for a high performance blade, that holds a great edge, and yet is easy to sharpen!
grind- a full flat grind, sharpened on a 325 DMT stone with micro bevels, to an agressive razor edge
finish- Quick rubbed 400 grit handsanded finish. although the blade has not been etched, in the right light you can see the hardening line pretty plainly
handle- a very nice piece of Bocote, with a 400 grit finish for a nice looking, yet secure grip, and brass corby bolts
guard- none
sheath- 11-12 ounce dyed leather. these sheaths with knives with no guard do not have the cam or snap fit. but the belt loop adds some tension to hold the knife
$195 plus $15 for shiping/insurance to CONUS. I can accept paypal Joe357m@bresnan.net or money order.
1st to post "I'll take it" gets it!!!
Ships within 48 hours of payment priority with ins.
Feedback appreciated, and thanks for looking!
If you would like one like this one or different, PM or email with details!
OAL- 8 1/8"
blade- 3 7/8" long, .093" thick at the spine, .040" measured 1/4" back from the edge, and .018" at the shoulder of the edge, 1" wide
steel- High Performance 1095, with in-house differential heat treatment which includes triple normalize, triple anneal, triple edge quench, and triple draw, for a high performance blade, that holds a great edge, and yet is easy to sharpen!
grind- a full flat grind, sharpened on a 325 DMT stone with micro bevels, to an agressive razor edge
finish- Quick rubbed 400 grit handsanded finish. although the blade has not been etched, in the right light you can see the hardening line pretty plainly
handle- a very nice piece of Bocote, with a 400 grit finish for a nice looking, yet secure grip, and brass corby bolts
guard- none
sheath- 11-12 ounce dyed leather. these sheaths with knives with no guard do not have the cam or snap fit. but the belt loop adds some tension to hold the knife
$195 plus $15 for shiping/insurance to CONUS. I can accept paypal Joe357m@bresnan.net or money order.
1st to post "I'll take it" gets it!!!
Ships within 48 hours of payment priority with ins.
Feedback appreciated, and thanks for looking!
If you would like one like this one or different, PM or email with details!
