Stuart Davenport Knives
Knifemaker / Craftsman / Service Provider
- Joined
- Feb 7, 2022
- Messages
- 497
Knife # 1 Hex Creek Hunter
After making some smaller hunting knives for a client, I really like the shorter blade. You really don't need much for processing game here in America. This one is in my favorite steel, CPM 10V, with a custom in house heat treatment using "cryo" quench and triple tempers. The spine is thin, 3/32". The blade has a full flat grind terminating in a VERY thin edge, and has a hand rubbed finish. The handle is black micarta, also hand polished. Talk about light weight! It locks right into my hand, and my wife really like how it felt in her smaller hands. Sharpening was done with diamond plates and stones for a hair whittling edge. 10V really holds an edge a long long time and is a perfect steel when wear resistance is needed.
OAL: 6 1/2"
Blade: 2 1/2"
Handle: 4"
Steel: Crucible CPM 10V 65HRC
Thickness: 0.083"
Edge: 15° per side 5 micron
Price: SOLD (kydex sheath and free USA shipping)
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Knife # 2 Hex Creek Hunter
Same as above, only in AEB-L stainless steel, Ghost G10 scales with white G10 liners, and thinner stock at 1/16". Looks really cool under a blacklight!
OAL: 6 1/2"
Blade: 2 1/2"
Handle: 4"
Steel: AEB-L stainless steel 63HRC
Thickness: 0.063"
Edge: 13° per side 1 micron
Price: $199 Now only $179!! (kydex sheath and free USA shipping)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Knife does come with kydex sheath. I make the sheath once the knife is purchased. Paypal preferred (samuraistuart@yahoo.com). Generally, the first person to send PP gets the knife. If you are interested, I recommend posting something like, "I'll take it! Funds sent." and sending payment immediately. No need to ask if it's still available. If there is ever a conflict, which hasn't happened yet, I will refund your PP immediately. I also take Venmo, DM me for the address, it's my wife's account and I forget the address. All knives come with free shiping in the USA and a lifetime unconditional warranty. I'll repair or replace, pretty much no matter what. Just understand that I like to use thin stock, thin grinds, and temper most steels for a slightly harder blade than you might be used to. I highly advise do not try to cut throught nails, bone, frozen food, or stab a car door, things like that. Just use it to cut stuff, like it was intended. If you have any questions, send me an email or DM me. Email is same as the PP address. Thanks for looking!
After making some smaller hunting knives for a client, I really like the shorter blade. You really don't need much for processing game here in America. This one is in my favorite steel, CPM 10V, with a custom in house heat treatment using "cryo" quench and triple tempers. The spine is thin, 3/32". The blade has a full flat grind terminating in a VERY thin edge, and has a hand rubbed finish. The handle is black micarta, also hand polished. Talk about light weight! It locks right into my hand, and my wife really like how it felt in her smaller hands. Sharpening was done with diamond plates and stones for a hair whittling edge. 10V really holds an edge a long long time and is a perfect steel when wear resistance is needed.
OAL: 6 1/2"
Blade: 2 1/2"
Handle: 4"
Steel: Crucible CPM 10V 65HRC
Thickness: 0.083"
Edge: 15° per side 5 micron
Price: SOLD (kydex sheath and free USA shipping)
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Knife # 2 Hex Creek Hunter
Same as above, only in AEB-L stainless steel, Ghost G10 scales with white G10 liners, and thinner stock at 1/16". Looks really cool under a blacklight!
OAL: 6 1/2"
Blade: 2 1/2"
Handle: 4"
Steel: AEB-L stainless steel 63HRC
Thickness: 0.063"
Edge: 13° per side 1 micron
Price: $199 Now only $179!! (kydex sheath and free USA shipping)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Knife does come with kydex sheath. I make the sheath once the knife is purchased. Paypal preferred (samuraistuart@yahoo.com). Generally, the first person to send PP gets the knife. If you are interested, I recommend posting something like, "I'll take it! Funds sent." and sending payment immediately. No need to ask if it's still available. If there is ever a conflict, which hasn't happened yet, I will refund your PP immediately. I also take Venmo, DM me for the address, it's my wife's account and I forget the address. All knives come with free shiping in the USA and a lifetime unconditional warranty. I'll repair or replace, pretty much no matter what. Just understand that I like to use thin stock, thin grinds, and temper most steels for a slightly harder blade than you might be used to. I highly advise do not try to cut throught nails, bone, frozen food, or stab a car door, things like that. Just use it to cut stuff, like it was intended. If you have any questions, send me an email or DM me. Email is same as the PP address. Thanks for looking!
Last edited:
