11,5" Krypton290 with leather sheath & Vanadis4e two hunters

[KornalskiKnives]

Hi,

You can find me on my website --> www.kornalski.com.pl
There are links to Instagram or Facebook if you use them.

Any questions; orders or want to talk mail me --> adam@kornalski.com

To all costs posted in the thread --> you need to add 5% for PayPal fee.
------------------------------------------------------------------------------------------------------------

STEEL - AISI A8Mod (Bohler Chipper, Uddeholm Viking)

General Uddeholm Viking is a oil-air-vacuum-hardening steel which is characterized by: • good dimensional stability during heat treatment • good machinability and grindability • excellent combination of toughness and wear resistance • normal hardness in the range 52–58 HRC • ideal for surface coating (CVD, PVD) Exaggerated sketch of a typical punch and die in action. The chemical composition of Uddeholm Viking gives a hardness potential of 58 HRC with compressive strength and wear resistance accordingly. The small amount of primary carbides means a high chipping resistance and with 8 % chromium follows a very good hardenability and also a fairly good resistance to corrosion.

Typical
C Si Mn Cr Mo V analysis %
0.5 1.0 0.5 8.0 1.5 0.5

Applications Uddeholm Viking is a versatile, high alloyed tool steel characterized by the right combination of toughness and wear resistance required for heavy duty blanking and forming.

---------------------------------------------------------------------------------------------------
Light is poor but you can see something big....

Knife: Krypton290
Steel: A8Mod Tool Steel
Thickness of 6,8 mm
Hardness: 57-58 HRC
Handle: G10 black sandblasted
Attachment: Turn black imbus screws
Finish blade: Stonewash
Size:
Total length: 430 mm
The width of the blade: 48 mm
Blade 290 mm
Weight 790 g.
Sheath: 4 mm black leather by SiperLetherWorks

-------------------------------------------------------------------------------------------------------
Knife: PushDagger
Steel: A8Mod Tool Steel
Thickness of 6,8 mm
Hardness: 57-58 HRC
Handle: G10 black sandblasted
Attachment: Turn black imbus screws
Finish blade: Stonewash
Size:
Total length: 180 mm
The width of the blade: 45 mm
Blade 105 mm
Weight 255 g.
Sheath: 1,5 mm black Kydex with Big TekLok

------------------------------------------------------------------------------------------------------------

Knife: Albion
Steel: Vanadis 4e Tool Steel
Thickness of 4,7 mm
Hardness: 62 HRC
Handle: Brown Canvas Micarta sandblasted
Attachment: Turn black imbus screws
Finish blade: Stonewash
Size:
Total length: 265 mm
The width of the blade: 34 mm
Blade 130 mm
Weight 250 g.
Sheath: 1,5 Kydex black with big TekLok

Nice Price: 180$ with all costs(shipping and PP fee)