11 knives in stock. SALE

KornalskiKnives

KornalskiKnives

Knifemaker / Craftsman / Service Provider
Feedback: +88 / =0 / -0
Joined
Sep 12, 2014
Messages
1,072
Hi,

You can find me on my website --> www.kornalski.com
Any questions; orders or want to talk mail me --> adam@kornalski.com

15$ for shipping by Shipping by GLOBAL Express.
Usually 10 working days for delivery.

Adam
------------------------------------------------------------------------------------------------

Knife: OstBush
Steel: Bohler K720 Tool Steel- AISI O2 Tool Steel 3.9 mm, 60 HRC
Coating / blade finish: Acid Stonewashed after fine sandblasting
Handle: G10
Sheath: ABS with Teklok mount
Overall length: 230 mm (8.86 inches)
Blade length: 100 mm (385 inches)
Blade width: 32 mm (1.32 inches)

Asking price: 130$ for knife with sheath + shipping

O120.jpg


------------------------------------------------------------------------------------------------

Knife: AgorEDC100
Steel: Bohler K720 Tool Steel- AISI O2 Tool Steel 3.9 mm, 60 HRC
Coating / blade finish: Acid Stonewashed after fine sandblasting
Handle: G10
Sheath: ABS with Molle mount
Overall length: 230 mm (8.86 inches)
Blade length: 100 mm (385 inches)
Blade width: 32 mm (1.32 inches)

Asking price: 130$ for knife with sheath + shipping

A1G10.jpg


-----------------------------------------------------------------------------------------------

Knife: AgorEDC100
Steel: Bohler K720 Tool Steel- AISI O2 Tool Steel 3.9 mm, 60 HRC
Coating / blade finish: Acid Stonewashed after fine sandblasting
Handle: G10
Sheath: ABS with Molle mount
Overall length: 230 mm (8.86 inches)
Blade length: 100 mm (385 inches)
Blade width: 32 mm (1.32 inches)


Asking price: 130$ for knife with sheath + shipping

A1DT.jpg


==================================================================================

HarvBush - 5" of blade[/B]

Blade: Sleipner Uddeholm Steel 4.6 mm, ~62 HRC HT for max. wear resistance (1080C 30 min + 2x 150min tempered in 555C) NO CRIO ;)
Coating / blade finish: Stonewashed
Handle: Black G10 with 1 mm G10 red linners, Stainless Torx security screws
Sheath: 3 mm ABS with TekLok
Weight: 210 g
Total length: 255 mm (~10")
Blade length: 120 mm (~4")
Blade width: 31 mm (~1,2")

Asking: 160$ + shipping by Global Express with tracking --> bank transfer to US Bank or Revolut payment or PayPal


harvslep.jpg


=========================================================================

Knife II
HarvBush - 5" of blade

Blade: Sleipner Uddeholm Steel 4.6 mm, ~62 HRC HT for max. wear resistance (1080C 30 min + 2x 150min tempered in 555C) NO CRIO ;)
Coating / blade finish: Stonewashed
Handle: Black G10 with 1 mm G10 red linners, Stainless Torx security screws
Sheath: 3 mm ABS with TekLok
Weight: 210 g
Total length: 255 mm (~10")
Blade length: 120 mm (~4")
Blade width: 31 mm (~1,2")

Asking: 160$ + shipping by Global Express with tracking --> bank transfer to US Bank or Revolut payment or PayPal

harvs2.jpg


=============================================================================================================

Knife: - Krypton 180 mm - ~7" of blade.
Steel: Uddeholm Sleipner Tool Steel
Thickness of 4,56 mm;
Handle: Micarta US canvas black with 1 mm red G10 sandblasted
Finish: Stonewashed
62 HRC for max Wear resistance.
Blade 180 mm (~7"); OVERAL: 295 mm (~11,6"); width: 40 mm
Sheath: ABS 3 mm black sheath included with strap.

Asking: 220$ with Global Express shipping


KR.jpg


====================================================================

Knife: ODC160
Steel: Uddeholm Sleipner Tool Steel
Thickness of 4,56 mm;
Hardness: 62 HRC Secondary hardness(no crio)
Handle: Wenge exotic wood with 1 mm red G10
Finish: Stonewashed
Blade 160 mm (~5"); OVERAL: 280 mm (~10"); width: 36 mm
Sheath: 3 mm Desert Camo Kydex with strap

Asking: 230$ with Global Express shipping


ODC160.jpg
 
Last edited:
Mikko145 - 6" of blade

Blade: Sleipner Uddeholm Steel 4.6 mm, ~62 HRC HT for max. wear resistance (1080C 30 min + 2x 150min tempered in 555C) NO CRIO ;)
Coating / blade finish: Stonewashed
Handle: Black G10 with 1 mm G10 red linners, Stainless Torx security screws
Sheath: 2 mm ABS with TekLok
Weight: 270 g
Total length: 285 mm (11 7/32")
Blade length: 145 mm (6")
Blade width: 38 mm (~1,2")

Asking: 170$ + shipping by Global Express with tracking --> bank transfer to US Bank or Revolut payment or PayPal


mikko1.jpg

mikko2.jpg

mikko3.jpg

mikko4.jpg

mikko5.jpg

mikko6.jpg


==========================================================================

Knife: Tanto AgorEDC 5,5" - OAL 265 mm.
Steel: CPM 3V PM Tool Steel
Thickness of 4,6 mm;
Hardness: 59-60 HRC Secondary hardness(no crio)
Handle: Yuta brown micarta sandblasted
Blade 125 mm (~5"); OVERAL: 260 mm (~10"); width: 32 mm
Sheath: 3 mm ABS black with big teklok

Asking: 190$ + shipping


tan.jpg


======================================================================

Knife: ODCMini 4 fingers
Steel: Bohler M398 Stainless Steel PM
Thickness: 3.5 mm
Hardness: 61 HRC
Handle: G10 black with G10 1 mm red linners
Attachment: Turn stainless steel M4 torx screws
Finish blade: Stonewash
Size:
Total length: 192 mm
Blade: 75 mm
Weight: 153 g.
Sheath: ABS 3mm neck style

Asking price: 150 USD + Global Express shipping full tracking

MODCG10.jpg


=======================================================================

Uddeholm PM Vanadis 4E 3,8 mm thick Kephart in Black Micarta with sheath

Blade: Vanadis 4E PM Steel 3.8 mm, 63 HRC HT for max. wear resistance )HT from 1080C and tempered in 555C twice
Coating / blade finish: Stonewashed
Handle: Micarta US Canvas Black 1 mm G10 red linners sandblasted,
Fitting:Stainless Torx security screws
Sheath: ABS 3 mm black sheath with Big TekLok

Weight: 250 g
Total length: 260 mm
Blade length: 125 mm (5")
Blade width: 33 mm (~1,3")

Asking: 200$ + shipping by Global Express with full tracking

KepClas.jpg
 
Last edited:
Emailing about this knife

Knife: ODCMini 4 fingers
Steel: Bohler M398 Stainless Steel PM
Thickness: 3.5 mm
Hardness: 61 HRC
Handle: Carbon Fibre and G10 with G10 1 mm red linners
Attachment: Turn stainless steel M4 torx screws
Finish blade: Stonewash
Size:
Total length: 192 mm
Blade: 75 mm
Weight: 153 g.
Sheath: ABS 3mm neck style

Asking price: 150 USD + Global Express shipping full tracking.
 
Morning, Adam. PM sent on

Mikko TANTO 145 - 6" of blade

Blade: Sleipner Uddeholm Steel 4.6 mm, ~62 HRC HT for max. wear resistance (1080C 30 min + 2x 150min tempered in 555C) NO CRIO ;)
Coating / blade finish: Stonewashed
Handle: Black G10 with 1 mm G10 red linners, Stainless Torx security screws
Sheath: 3 mm ABS with TekLok
Weight: 270 g
Total length: 285 mm (11 7/32")
Blade length: 145 mm (6")
Blade width: 38 mm (~1,2")

Asking: 170$ + shipping by Global Express with tracking --> bank transfer to US Bank or Revolut payment or PayPal
 
ljn21 said:
Man if only that ODC160 was 3v or Magnacut, beautiful work!
Click to expand...

I will make few with 3V.

IMO Uddeholm/Bohler steels are better than CPM.
M398 is better than Magnacut.
Vanadis 4E is better than 3V.

I know - you (US Men) like and support domestic metalurgy and all US stuff (BTW I like that way) but my opinion is built on 12 years of making fixed knives.
CPM steels are very good but Swedes and Austrians know their job better - IMO of course.

I am far away of marketing so will use CPM 3V for 17 knives last time and will not buy and make any knives with Magnacut.

I am for Elmax and M398(M390).

Will stay with Vanadis 4E, Elmax and Sleipner for cheaper big knives.

Merry Xmas for all ;)

J.

EDIT.

The most important think is knifemaking is HEAT TREATMENT! You can spoil the best steel or make perfect blade with poor one.....
 
m398 is not 'better' than magnacut... it might have a slightly increased edge retention due to the very high carbides, but it gives up toughness by a factor of 4 or 5

in other words, the biggest problem with m398 will be chipping / snapping if used sideways (lateral pressure) etc etc... the best 'use' scenario for m398 is in smaller blades which will not be abused

good write up -> https://knifesteelnerds.com/2020/10/26/m398-steel-testing-edge-retention-toughness-and-more/
you see toughness is about same as s125v around 3 ft-lbs

...

I agree with you using vanadis 4e - that is excellent all around since its much tougher and yes, imho its a better choice than most cpm
(I think you'll find most Americans also like it & know it)

Love your designs & esp the wood handles you make... esp that tanto is very sweet looking
Merry Christmas
 
Yes, you are right stainless steels should be used in edc knives 3-6 inches and only if customer needs that kind of steel or do not like rust(patina)

So I use Elmax, Vanadis4e and for big choppers A8Mod or A2 and Sleipner.

Merry Xmas for all...

Adam
 
Adam,

The ODC Mini 4 finger arrived yesterday. Just got the package opened up today and this thing is amazing. Love it!
 
Jglebar said:
Haha! Probably not both but definitely one of them, is there any difference between them? I didn’t notice any difference in the pictures but sometimes it’s hard to tell.
Click to expand...
They are.as the same as hand made knives could be. Pick one you like more.
 
KornalskiKnives said:
They are.as the same as hand made knives could be. Pick one you like more.
Click to expand...
the 2nd one for some reason caught my eye! Message me or email at your conscience with final price and PayPal info if you are okay with PayPal.
Thank you
Grant

Edit: had wrong email posted
 
Last edited:
Adam, the harvbush arrived today. It is an amazing knife my friend! Keep up the great work!
 
You must log in or register to reply here.
Back
Top