- Joined
- Nov 8, 2009
- Messages
- 1,533
(8 availible) These are the same as my .093" clips but are made from super thick .125" Kydex for the ultimate rigidity. The first photo shows a .125" clip (at left) next to one in .093" for comparison. They are really stiff and are the next best thing to a closed belt loop, but still offer the quick detach function and universal carry modes, including waistband carry without a belt (inside or out). These are strong enough to support just about any weight that you would want to carry on your belt, clothing, etc. For liability reasons I do not recommend them for carrying a firearm, although I do feel that they would serve that function better than some commercially-availible holster clips. Accepts a belt/strap up to 1-3/4" wide.
The mounting slots are vertically spaced to fit any sheath that accepts a large Tek-Lok, and up to 2-1/8”. Horizontal spacing is 1-9/16".
Provides more carry options than I can really list. Belt (inside or out), waistband (inside or out), boot top, pocket top, etc. Can be inverted to hang from the top of coveralls, etc. A certain lady I know carries a small knife/sheath with the clip inverted, hooked over her bra strap under her arm. Perfect for low-profile or concealed carry .You can pop it on or off in about a second, just pull the tab out and slap it on where you want it.
Mounting slots are spaced 1-9/16" (width) and 1-1/4" to 2-1/8" (length) on center and are sized to accept standard sized screw posts (Chicago screws). Overall dimensions are 2-3/8" (wide) x 3-3/8" (length), fits up to 1-3/4" belt, strap, etc.
7.00 $ each (plus shipping) without mounting hardware, 6.75$ each for orders of 5 or more. I am not currently able to offer mounting screws/posts but will be offering them in the near future. First Class shipping within the U.S. for up to 5 of these is usually under 3$.
http://www.bladeforums.com/forums/attachment.php?attachmentid=254966&d=1327766297
The mounting slots are vertically spaced to fit any sheath that accepts a large Tek-Lok, and up to 2-1/8”. Horizontal spacing is 1-9/16".
Provides more carry options than I can really list. Belt (inside or out), waistband (inside or out), boot top, pocket top, etc. Can be inverted to hang from the top of coveralls, etc. A certain lady I know carries a small knife/sheath with the clip inverted, hooked over her bra strap under her arm. Perfect for low-profile or concealed carry .You can pop it on or off in about a second, just pull the tab out and slap it on where you want it.
Mounting slots are spaced 1-9/16" (width) and 1-1/4" to 2-1/8" (length) on center and are sized to accept standard sized screw posts (Chicago screws). Overall dimensions are 2-3/8" (wide) x 3-3/8" (length), fits up to 1-3/4" belt, strap, etc.
7.00 $ each (plus shipping) without mounting hardware, 6.75$ each for orders of 5 or more. I am not currently able to offer mounting screws/posts but will be offering them in the near future. First Class shipping within the U.S. for up to 5 of these is usually under 3$.
http://www.bladeforums.com/forums/attachment.php?attachmentid=254966&d=1327766297
