- Joined
- Feb 13, 2011
- Messages
- 211
GETTING MY AIR CONDITIONER THANKS TO ALL!!!! I WILL BE WORKING HARDER THAN EVER TO GET YOUR BLADES OR FINISHED KNIVES TO YOU! THE SALE CONTINUES THOUGH TURN AROUND IS LONGER UNLESS ONLY A BLADE IS WANTED. THIS WILL ONLY REMAIN FOR A COUPLE OF DAYS.
THANKS AGAIN!!! I CAN'T SAY IT ENOUGH.
All items are plus actual shipping. I will show finished pics if wanted! Just provide a phone number and say what you want to see!
Blades remaining are $50 Satin belt finished.
Bolsters add $30
Handle materials I have in stock add $30 or actual cost plus $20 if ordered.
Simple leather sheath $30
ANY CHANGES WILL BE A DIFFERENT PRICE AND WILL HAVE TO BE AGREED UPON!
I can and will alter these though I will not add bolster holes to hardened blanks. Email questions to christopherlambeth@gmailDOTcom . I will check this thread but not my inbox on the forum. It’s quick and dirty and that’s the point. If you want to turn one of these into a knife made more personally for you email me; we will talk. GMAIL’s time stamp will be the rule. Title line needs to say you will take #.... Include the rest in the body and a zip code.
1. 5160- unground and not heat treated. You can specify hollow or flat. Will have to wait for these to be performed.
2. --SOLD-- (BUT SEE OFFER BELOW!) 1095 - “Pig-Sticker” flat ground. Meant for bolsters, made for myself. Tempered to be tough as it is a copy of a hog hunting knife I previously designed. Intend(ed) to take a deer with it. Yes. Feel free to not discuss that unless you wanna come with.
3. ---SOLD--- 1095 - hollow ground, meant to be camp chopper.
4. Ats-34 - the first of 3 made the same. Buyer backed out. Great skinners. Make these commonly with or without bolsters.
5. 1095 - $20 - flat ground with finger notches. Fairly thin by custom standards. <--I take that back
“First works”.
6. Ats-34 - hollow ground 2nd of 3.
7. --SOLD-- Elmax - hollow ground, meant for bolsters.
8. A2 – hollow ground meant for bolsters, was going to have small brass tube in middle of bolster for unique look.
9. Ats-34 – last of the 3. Only one that hasn’t been dehorned at the back.
10. O-1 – Simple EDC style or skinner. Hollow ground.
11. 154CM – hollow ground meant for bolsters. “Rhino” design.
12. N690 - again available – hollow ground to thin edge. Constant radius. Same handle design as the three matching but larger. Could regrind into short drop or clip point….
13. 154CM – $30 hollow ground. “3 finger” design. I have finished this blade and it is ready for handles. Very nice blade.
THANKS AGAIN!!! I CAN'T SAY IT ENOUGH.
All items are plus actual shipping. I will show finished pics if wanted! Just provide a phone number and say what you want to see!
Blades remaining are $50 Satin belt finished.
Bolsters add $30
Handle materials I have in stock add $30 or actual cost plus $20 if ordered.
Simple leather sheath $30
ANY CHANGES WILL BE A DIFFERENT PRICE AND WILL HAVE TO BE AGREED UPON!
I can and will alter these though I will not add bolster holes to hardened blanks. Email questions to christopherlambeth@gmailDOTcom . I will check this thread but not my inbox on the forum. It’s quick and dirty and that’s the point. If you want to turn one of these into a knife made more personally for you email me; we will talk. GMAIL’s time stamp will be the rule. Title line needs to say you will take #.... Include the rest in the body and a zip code.
1. 5160- unground and not heat treated. You can specify hollow or flat. Will have to wait for these to be performed.
2. --SOLD-- (BUT SEE OFFER BELOW!) 1095 - “Pig-Sticker” flat ground. Meant for bolsters, made for myself. Tempered to be tough as it is a copy of a hog hunting knife I previously designed. Intend(ed) to take a deer with it. Yes. Feel free to not discuss that unless you wanna come with.
3. ---SOLD--- 1095 - hollow ground, meant to be camp chopper.
4. Ats-34 - the first of 3 made the same. Buyer backed out. Great skinners. Make these commonly with or without bolsters.
5. 1095 - $20 - flat ground with finger notches. Fairly thin by custom standards. <--I take that back
“First works”.6. Ats-34 - hollow ground 2nd of 3.
7. --SOLD-- Elmax - hollow ground, meant for bolsters.
8. A2 – hollow ground meant for bolsters, was going to have small brass tube in middle of bolster for unique look.
9. Ats-34 – last of the 3. Only one that hasn’t been dehorned at the back.
10. O-1 – Simple EDC style or skinner. Hollow ground.
11. 154CM – hollow ground meant for bolsters. “Rhino” design.
12. N690 - again available – hollow ground to thin edge. Constant radius. Same handle design as the three matching but larger. Could regrind into short drop or clip point….
13. 154CM – $30 hollow ground. “3 finger” design. I have finished this blade and it is ready for handles. Very nice blade.
Last edited:
