- Joined
- Mar 16, 2015
- Messages
- 1,853
Hello Bladeforums!
Maybe it’s because it’s late, but I’ve realized I’ve accumulated way too much stuff that doesn’t get used anymore. So I’ve decided to try and sell this as a lot, so as to save time and money for everyone. I will give my best description of each included knife, but they have all been carried so will show pocket marks. I’ll do my best to clean them up before they ship and I will get them out by Tuesday. I may have boxes for some but no guarantees, if so I’ll ship them as well.
Please feel free to email me at Prestonreed1@gmail.com with questions or offers, thanks for looking!
Included knives (left to right):
Western L39- patina started on the blade, but overall extremely little use. Tight handle and decent carry-able sheath
Queen Swingguard- D2 blade, tight lockup with minimal gapping. Guard on one side wiggles vertical ever so slightly but doesn’t affect use.
Case mini Copperhead(natural)- nice construction, early 2000’s
Case mini Copperhead(pink)- same as above, beautifully done little knives
Case Splitback Whittler- I believe 70’s make, tight, stout springs, sturdy blades. This one is a gem!
Case Copperhead- vault release, used but taken care of, perfect medium spring tension for EDC.
Schatt and Morgan Muskrat- rosewood handles, stainless blades. The construction is a little wonky- it looks like they bent the frame of the handle to fit the handle scales. However, doesn’t affect use and this is a workhorse of a muskrat. Probably the toughest built one I’ve had.
Kissing Crane med. toothpick- like new, Chinese made stainless/delrin
Camillus 67- carried a bunch but used very little, stainless blades with great construction. Would be a good EDC. Delrin handles
Camillus Electrician- looks relatively unused, though it’s sure seen the inside of a toolbox. Would be a great work knife.
Camillus sailor knife- older bone handles, decent construction- might be a cool clean up project or vintage EDC
Modded Opinel- Opinel that I’ve ground a thinner clip point into, shaped handle and blued blade. Still a razor, just a little more “French toothpick-esque”
Robeson cigar pen knife- this is a great small knife, both stainless blades are absolute razors. Sturdy single spring!
Buck 705 Pony- like new, cool little tank of a slipjoint, single spring
Schrade 708B- classy pen knife, no wiggle in open position, but interesting way of fitting both blades into the small frame. Looks pretty unused.
Richards Sheepsfoot- I want to keep this one! The blade is fantastic, but the handles are from a time when they were meant to be cheap. Plastic scales/ shell bolsters
Colonial Barlow- same deal, shell handled, has seen a lot of use in days gone by.
Sabre Barlow- as above, shell handled and sharpened. Cool “made in Hong Kong” Barlow
***If interested, I also have a bag of cheap project/“throwaway” work knives and parts that I’d throw in. I don’t need them but I don’t want to clutter someone else’s desk with them unless they want them**
Overall, that’s at least 18 knives included, with the option of adding an extra bag of goodies. I’ve paid more than what I’m asking, but for sake of easy sell I’d like to get$350 now 275 shipped- that’s less than twenty dollars a knife! Please feel free to reach out for any questions, thank you!
Maybe it’s because it’s late, but I’ve realized I’ve accumulated way too much stuff that doesn’t get used anymore. So I’ve decided to try and sell this as a lot, so as to save time and money for everyone. I will give my best description of each included knife, but they have all been carried so will show pocket marks. I’ll do my best to clean them up before they ship and I will get them out by Tuesday. I may have boxes for some but no guarantees, if so I’ll ship them as well.
Please feel free to email me at Prestonreed1@gmail.com with questions or offers, thanks for looking!
Included knives (left to right):
Western L39- patina started on the blade, but overall extremely little use. Tight handle and decent carry-able sheath
Queen Swingguard- D2 blade, tight lockup with minimal gapping. Guard on one side wiggles vertical ever so slightly but doesn’t affect use.
Case mini Copperhead(natural)- nice construction, early 2000’s
Case mini Copperhead(pink)- same as above, beautifully done little knives
Case Splitback Whittler- I believe 70’s make, tight, stout springs, sturdy blades. This one is a gem!
Case Copperhead- vault release, used but taken care of, perfect medium spring tension for EDC.
Schatt and Morgan Muskrat- rosewood handles, stainless blades. The construction is a little wonky- it looks like they bent the frame of the handle to fit the handle scales. However, doesn’t affect use and this is a workhorse of a muskrat. Probably the toughest built one I’ve had.
Kissing Crane med. toothpick- like new, Chinese made stainless/delrin
Camillus 67- carried a bunch but used very little, stainless blades with great construction. Would be a good EDC. Delrin handles
Camillus Electrician- looks relatively unused, though it’s sure seen the inside of a toolbox. Would be a great work knife.
Camillus sailor knife- older bone handles, decent construction- might be a cool clean up project or vintage EDC
Modded Opinel- Opinel that I’ve ground a thinner clip point into, shaped handle and blued blade. Still a razor, just a little more “French toothpick-esque”
Robeson cigar pen knife- this is a great small knife, both stainless blades are absolute razors. Sturdy single spring!
Buck 705 Pony- like new, cool little tank of a slipjoint, single spring
Schrade 708B- classy pen knife, no wiggle in open position, but interesting way of fitting both blades into the small frame. Looks pretty unused.
Richards Sheepsfoot- I want to keep this one! The blade is fantastic, but the handles are from a time when they were meant to be cheap. Plastic scales/ shell bolsters
Colonial Barlow- same deal, shell handled, has seen a lot of use in days gone by.
Sabre Barlow- as above, shell handled and sharpened. Cool “made in Hong Kong” Barlow
***If interested, I also have a bag of cheap project/“throwaway” work knives and parts that I’d throw in. I don’t need them but I don’t want to clutter someone else’s desk with them unless they want them**
Overall, that’s at least 18 knives included, with the option of adding an extra bag of goodies. I’ve paid more than what I’m asking, but for sake of easy sell I’d like to get
Last edited: