2/18/13 President's Day

[VCM3]

Good morning all. I have a few knives of my own to list,today,but also would like to extend a little sale on some knives in stock. The sale prices are for today only.

Let's start with a Ken Erickson trapper,shadow ,in LSCF
Take $100. off the listed prices :
http://www.vcmcustomknives.com/lightning-strike-carbon-fiber-trapper.html

I have 10 John Lloyd slipjoints ,take $25. off the listed prices. The link to my site is at the bottom of my posts in my "Sig Line"

I have 2 Dale Howe fillet knives,take $20. off the listed prices


The next post,I'll start on my own hand crafted knives .....................

 

[VCM3]

The knives I will list are built by me using Russell Harrington Green River blade blanks. Made in the U.S.A. Flat ground,forged carbon (1095)
All of these knives listed in the next posts ,have hand rubbed finish on the blades
Prices include Paypal fee's & Con. U.S. shipping on these RGR knives by VCM.
The leather on the Ripper & Patch knives is by Ray at WildBoar blades. Heavy leather,dyed & tooled.Knives will go in the sheath either way,so they work right or left belt side carry. Belt loops are sewn flat,these work geat "in pocket" too.

This Ripper has dyed & stabilized curly maple,and brass pinns sold
OAL is 8.25" with 4" of cutting edge 1/16" stock,a slicer not a pry bar.These take a wicked edge.

Has green/grey hue's 600+ grit finish on the handle

 

[VCM3]

A ripper with nickel pins,hand peened/domed with mild hammered finished look to them,to give this vintage pattern knife an "old timey" look. The stag has a "saddle" for a righty,that is a natural curve for your palm grip.Same dimensions as the maple ripper in the prev. post sold

"Patch" knife,with nickel hand peened/domed finis,again,mildly hammered finish. Both stag knives in this post,,the pins are completely smooth to the hand.6-3/8" with 3" of cutting edge. Same steel & sheath spec's as the Ripper knives sold

 

[VCM3]

Named after the farm in Kentucky where the first set I did resides. Camp/kitchen/butcher. These two have it covered,for your lifetime & passed down.
African Blackwwod,ful figured,very high quality grade. Smooth in hand,very grippy wet. 1/8" nickel pins.

Both have 3/32" stock,flat ground,forged 1095 carbon from Russell Green River. These take a wicked edge & hold it!

*****************Set is Sold Thanks*****************

Boning is 10.5" OAL with 6" of cutting edge

Medium butcher is 11.5" OAL with 7" of cutting edge