2 EDC knives, 52100 steel and vintage two tone micarta [SOLD]

Daado

Knifemaker / Craftsman / Service Provider
Feedback: +205 / =0 / -0
Joined
Apr 5, 2015
Messages
2,240
Both forged closest to shape from 52100 bar.
Nice EDC's blades with tapered tang and distal taper towards the tip.
Cute, thin and razor sharp. Rounded heel for comfortable grip.

Flats are left raw, soaked in vinegar to remove forging scale and wire brushed.
After heat treatment, flats are brushed with scotch brite.
Bevels are made in satin finish with scotch brite.

Handle material: Vintage two tone canvas micarta (1980's), black G10 liners, carbon fiber pins and lanyard tube.
Scales are finished with 240 grit sandpaper and brushed with coarse scotch brite to make more secure grip


#1

Overall length - 7,9"
Blade length - 3,4"
Blade width - 0,9"
Thickness -1/8"
Tang tapers to - 5/64"
The knife weights 3 oz and with sheath is 5,5 oz
Handmade 4mm thick (10 oz) vegetable tanned leather sheath, vertical right hand carry.


#2

Overall length - 7,1"
Blade length - 3"
Blade width - 0,8"
Thickness -1/8"
Tang tapers to - 3/64"
The knife weights 2,3 oz and with sheath is 4,4 oz
Handmade 4mm thick (10 oz) vegetable tanned leather sheath, pocket carry without belt loop. Rounded tip for more comfortable fit in the pocket.

HfSSz5T.jpg

lLGoO3Z.jpg

ePU4qaO.jpg

8ckAqPc.jpg

wixOjvi.jpg

akuKomU.jpg


Asking SOLD

priority int. shipping with tracking number included.

You can PM/email me: seckardalibor@gmail.com
PayPal ( seckardalibor@gmail.com ) accepted.
Thanks for looking.
Dalibor.
 
Last edited:
These are so well done, I've bought several and everyone I've given one to says they cut great, hold an edge. The sheath is also very nice, not a light weight leather.
 
These are so well done, I've bought several and everyone I've given one to says they cut great, hold an edge. The sheath is also very nice, not a light weight leather.
Thank you very much!
 
Back
Top