- Joined
- Feb 1, 2010
- Messages
- 1,312
Specs:
Number 1: Necker
Blade steel is 3/16 inch thick 1095 hardened to approximately 59 to 60 Rc.
Blade Length: 2.5 inches long tip to wrap with hammer mark and forging scale sides and ground steel bevels.
Overall Length: 5.5 inches long
Handle is black paracord wrapped over white cordage and epoxy soaked with lanyard hole in tang.
Sheath is black Kydex (shown)
Number 2: Nessmuk
1/8 inch thick 1095 high carbon steel differentially heat treated with edge at 59-60 Rc, tip at approx 55Rc and spine in high 40s Rc.
Handle is coyote tan paracord wrapped onto knife's full tang. Under the wrap is sealed to prevent rust.
Blade Length is 2.9 inches from tip to wrap and burnished steel flats and bevels.
Overall Length about 7.3 inches
Coyote tan Kydex sheath (shown) with holes spaced for either large or small Tek-lok
SOLD: Price is $40 plus $7 shipping in US
Number 3:
Blade steel is 1/4 inch thick 1095 hardened to approximately 59 to 60 Rc.
Blade Length: 3.1 inches long tip to wrap with hammer mark and forging scale sides and ground steel bevels.
Overall Length: 6.5 inches long
Handle is black paracord wrapped over blue cordage and epoxy soaked with lanyard hole in tang.
Sheath is black Kydex (shown)
SOLD Price $40 delivered in US
I prefer PayPal (my account is but accept other forms of payment.
Kelley Ward
Hard Edge Knives
Number 1: Necker
Blade steel is 3/16 inch thick 1095 hardened to approximately 59 to 60 Rc.
Blade Length: 2.5 inches long tip to wrap with hammer mark and forging scale sides and ground steel bevels.
Overall Length: 5.5 inches long
Handle is black paracord wrapped over white cordage and epoxy soaked with lanyard hole in tang.
Sheath is black Kydex (shown)
Number 2: Nessmuk
1/8 inch thick 1095 high carbon steel differentially heat treated with edge at 59-60 Rc, tip at approx 55Rc and spine in high 40s Rc.
Handle is coyote tan paracord wrapped onto knife's full tang. Under the wrap is sealed to prevent rust.
Blade Length is 2.9 inches from tip to wrap and burnished steel flats and bevels.
Overall Length about 7.3 inches
Coyote tan Kydex sheath (shown) with holes spaced for either large or small Tek-lok
SOLD: Price is $40 plus $7 shipping in US
Number 3:
Blade steel is 1/4 inch thick 1095 hardened to approximately 59 to 60 Rc.
Blade Length: 3.1 inches long tip to wrap with hammer mark and forging scale sides and ground steel bevels.
Overall Length: 6.5 inches long
Handle is black paracord wrapped over blue cordage and epoxy soaked with lanyard hole in tang.
Sheath is black Kydex (shown)
SOLD Price $40 delivered in US
I prefer PayPal (my account is but accept other forms of payment.
Kelley Ward
Hard Edge Knives
Last edited: