2 EDCs

Feedback: +119 / =0 / -0
Joined
Feb 1, 2010
Messages
1,312
Sidewinder
1/8 inch thick 1095 high carbon steel differentially heat treated with edge at 59-60 Rc, tip at approx 55Rc and spine in high 40s Rc.

Handle is coyote brown paracord wrapped onto knife's full tang. Under the wrap is sealed with Loctite Blackmax.

Blade Length is 3.8 inches from tip to wrap with dark flats and ground bevels.

Overall Length is about 8 inches

Sheath: Coyote Brown Kydex (shown) with holes spaced for large and small Tek-lok

SOLD Price is $40 plus $7 shipping in US with Kydex Sheath
5ta5.jpg


e944.jpg


jwj9.jpg


hvcb.jpg


Drop Point
3/16 inch thick 1095 high carbon steel differentially heat treated with edge at 59-60 Rc, tip at approx 55Rc and spine in high 40s Rc.

Handle is gutted black paracord traditionally wrapped with diamonds showing the under lying black cordage on the knife's full tang. The paracord and cordage are epoxy soaked for greater wear.

Blade Length is 3.1 inches from tip to wrap.

Overall Length is about 6.9 inches

Sheath: Black Kydex (shown) with holes spaced for large and small Tek-lok

SOLD Price is $40 plus $7 shipping in US with Kydex Sheath

I Prefer PayPal but take other forms of payment.

2avz.jpg


wbq0.jpg


wmmw.jpg


yfai.jpg
 
Last edited:
That very tribal wrap on the "Drop Point" is calling my name ... I'll take it

(please confirm and I'll get the PP out)
 
Hello Chris, I think your refering to the Sidewinder and if so the answer is yes I call it the Viper. I may have an unfinished one close to being done I can check if your interested. I have more ground and ready for heat treatment but they will not be ready for a while.
Kelley
 
Back
Top