2 Kiridashis

[Robert Erickson]

Hey guys,
I've got one new one and a couple of reposts here today.
The first is a 3V Kiridashi with stabilized Redwood Burl and black liners and pins. It's a right sided chisel grind down to 0.05" before sharpening. The blade has been hand sanded to 400 grit. It is RC61.
SPECS:
OAL:7"
Blade: 3" cutting surface, hand sanded finish to 400 grit. Right hand chisel grind down to 0.05" before sharpening.
Steel: 5/32" CPM 3V heat treated in my Evenheat kiln with low temp tempering to RC61
Handle: Stabilized Redwood Burl, black micarta liners and pins
Sheath: TekLok ready Kydex
$135 plus $10 shipping CONUS, international buyers welcome shipping extra.
Post "I'll take it" here in this thread and then email or PM me for arrangements.
Comments/questions/critiques welcome.

fullsizeoutput_815 by Robert Erickson, on Flickr

fullsizeoutput_810 by Robert Erickson, on Flickr

fullsizeoutput_80f by Robert Erickson, on Flickr

fullsizeoutput_811 by Robert Erickson, on Flickr

fullsizeoutput_813 by Robert Erickson, on Flickr

fullsizeoutput_814 by Robert Erickson, on Flickr

fullsizeoutput_816 by Robert Erickson, on Flickr


The second Kiridashi is Alabama Damascus steel heat treated by Peter's to RC60. The sheath is black dyed leather and is sized to fit nicely in a shirt or pants pocket.
It's 6.5" long and the cutting edge is 2.75". All the edges are chamfered for comfort.

$65 Plus $10 shipping CONUS, international buyers welcome, shipping extra.
Post "I'll take it" here in this thread and them PM or email for arrangements.
Paypal, checks and money orders accepted.
Comments/Questions/Critiques welcome.
Thanks!

fullsizeoutput_543 by Robert Erickson, on Flickr

fullsizeoutput_542 by Robert Erickson, on Flickr

fullsizeoutput_541 by Robert Erickson, on Flickr

fullsizeoutput_540 by Robert Erickson, on Flickr

fullsizeoutput_53f by Robert Erickson, on Flickr

fullsizeoutput_53e by Robert Erickson, on Flickr

Lastly I've got a nice little EDC that I'm reposting. It's 0.10" AEB-L steel heat treated by Peter's to RC61. It would be just as happy as a back packing knife or bird and trout blade. The handle is Oreo by Shadetree with red G10 liners. The finish is 600 grit satin belt finish. A leather sheath is included in the price.
SPECS:
OAL: 8.25"
Blade: 3.75" long, 1" wide full flat grind with sight convex bevel down to 0.09" before sharpening. 600 grit satin belt finish
Steel: 0.10" AEB-L heat treated by Peter's to RC61
Handle: Oreo canvas phenolic by Shadetree, black micarta pins and red G10 liner.
Sheath: Basic leather pouch or Kydex sheath.

$SOLD plus $10 shipping CONUS, international shipping extra.
Post "I'll take it" here in this thread and then PM or email for arrangements.
It is posted elsewhere therefore timestamps will be used.
Paypal, checks and money orders accepted.
Comments/Questions/Critiques welcome
Thanks!

fullsizeoutput_6d9 by Robert Erickson, on Flickr

fullsizeoutput_6da by Robert Erickson, on Flickr

fullsizeoutput_6d1 by Robert Erickson, on Flickr

fullsizeoutput_6d2 by Robert Erickson, on Flickr

fullsizeoutput_6d4 by Robert Erickson, on Flickr

fullsizeoutput_6d5 by Robert Erickson, on Flickr

fullsizeoutput_6d7 by Robert Erickson, on Flickr

 

[Sonnydaze]

That AEB-L EDC is super...

 

[huelsdonk]

That AEB-L EDC is super...

I concur . If it’s still available, I’ll take it. PM headed your way.

Thanks,
John

 

[Robert Erickson]

That AEB-L EDC is super...

Thank you!

I concur . If it’s still available, I’ll take it. PM headed your way.

Thanks,
John

It is sir, thank you!
Here is the sheath that I made for it:
IMG_8686 by Robert Erickson, on Flickr

 

[Juicytarget]

Hi !

I'd like to ask you, could you make any other kiridashi's like the Alabama Damascus one but in 3v ?

If yes I'd like to talk to you by mail, but I don't see yours..

Thanks