- Joined
- Sep 3, 2008
- Messages
- 961
Knives will be shipped via USPS. Payment may be made by Paypal F&F, Zelle or USPS money order. All knives are priced with shipping included.
Posts with info: Post# 323 https://www.bladeforums.com/threads/antique-cattaraugus-knives-and-company-history.1239398/page-17
Post# 308 https://www.bladeforums.com/threads/antique-cattaraugus-knives-and-company-history.1239398/page-16
These started out as GEC15 patterns and were then customized by Esnyx with rosewood covers salvaged from the old Cattaraugus factory, new blade etch as seen in photos and custom bolsters. I believe he also made new liners so the only original GEC parts that remain are the blades and backsprings. Not an expert here so feel free to chime in and correct me.
- USA sales only at this time
- Please ask any questions prior to purchase
- All offers should be sent via PM or email
- First "I'll take it" in this thread gets it
- No trades at this time
GEC15 Pattern Sheepsfoot:$275.00 SOLD, Sheepsfoot blade, great walk and talk with light pull and I would rate snap at 4 - 5 on the sheepsfoot blade that has extemely faint horizontal scratches in the right light but I can't get photographed. Definitely not a finger nail breaker. Beautiful old Cattaraugus rosewood covers, brass liners, brass pins and either nickel or stainless polished bolsters which show very faint scratches which should polish out if you choose.
GEC15 Pattern Clip Point: $275.00, Clip point blade, good walk and talk with very light pull and I would rate snap at a 3 on the clip point blade. Definitely not a finger nail breaker. Beautiful old Cattaraugus rosewood covers. Liners, bolsters, pins all appear to be stainless and have a satin hand finish, don't think they are nickel. The blade on this one is thinner than the others and there are no GEC markings. This one I am unable to confirm if it is a complete custom or another GEC rebuild custom which is what I suspect.
Posts with info: Post# 323 https://www.bladeforums.com/threads/antique-cattaraugus-knives-and-company-history.1239398/page-17
Post# 308 https://www.bladeforums.com/threads/antique-cattaraugus-knives-and-company-history.1239398/page-16
These started out as GEC15 patterns and were then customized by Esnyx with rosewood covers salvaged from the old Cattaraugus factory, new blade etch as seen in photos and custom bolsters. I believe he also made new liners so the only original GEC parts that remain are the blades and backsprings. Not an expert here so feel free to chime in and correct me.
- USA sales only at this time
- Please ask any questions prior to purchase
- All offers should be sent via PM or email
- First "I'll take it" in this thread gets it
- No trades at this time
GEC15 Pattern Sheepsfoot:
GEC15 Pattern Clip Point: $275.00, Clip point blade, good walk and talk with very light pull and I would rate snap at a 3 on the clip point blade. Definitely not a finger nail breaker. Beautiful old Cattaraugus rosewood covers. Liners, bolsters, pins all appear to be stainless and have a satin hand finish, don't think they are nickel. The blade on this one is thinner than the others and there are no GEC markings. This one I am unable to confirm if it is a complete custom or another GEC rebuild custom which is what I suspect.
Attachments
Last edited:
