Daado
Knifemaker / Craftsman / Service Provider
- Joined
- Apr 5, 2015
- Messages
- 2,298
I have two nice slicers for sale.
They can fit in Bird and Trout design, just a bit smaller than i usually make them.
They were forged from piece of 128mm HE rocket warhead.
More information in this thread:
http://www.bladeforums.com/forums/showthread.php/1483268-Rocketeer
I made them as test knives and i was more than happy with the results, so i decided to finish them.
#1 [SOLD]
Details:
Overall length - 6,7"
Blade length - 3,14"
Blade width - 0,8"
Thickness at the back of the spine - 3/32"
Tang is tapered to 3/64" at the end
Knife weight is 1,9oz, and with sheath is 3,9oz
Bevels are finished with scotch brite. Flats are left "brute de forge"
Handle material: Walnut, red vulkanfiber liners, brass pins and lanyard tube.
Handmade 4mm thick (0,16") vegetable leather sheath.
Asking SOLD, priority shipping with tracking number included
#2 [SOLD]
On this one, i tried to achieve aged look. Bevels are hand polished with 1000 grit and etched in FC. Flats are left "brute de forge"
Antler is treated with Potassium permanganate to make it look older. Soft pieces of antler are sealed with epoxy resin.
I used red vulkanfiber as liner material. Pins are hammered.
Details:
Overall length - 7,24"
Blade length - 3,14"
Blade width - 0,86"
Thickness at the back of the spine - 1/8"
Tang is tapered to 3/64"
Knife itself weights 3 oz, and with sheath is 5,4 oz
Handmade 4mm thick (0,16") vegetable leather sheath.
Asking SOLD, priority shipping with tracking number included
You can PM/email me: seckardalibor@gmail.com
PayPal ( seckardalibor@gmail.com ) accepted.
Thanks for looking.
Dalibor.
They can fit in Bird and Trout design, just a bit smaller than i usually make them.
They were forged from piece of 128mm HE rocket warhead.
More information in this thread:
http://www.bladeforums.com/forums/showthread.php/1483268-Rocketeer
I made them as test knives and i was more than happy with the results, so i decided to finish them.
#1 [SOLD]
Details:
Overall length - 6,7"
Blade length - 3,14"
Blade width - 0,8"
Thickness at the back of the spine - 3/32"
Tang is tapered to 3/64" at the end
Knife weight is 1,9oz, and with sheath is 3,9oz
Bevels are finished with scotch brite. Flats are left "brute de forge"
Handle material: Walnut, red vulkanfiber liners, brass pins and lanyard tube.
Handmade 4mm thick (0,16") vegetable leather sheath.
Asking SOLD, priority shipping with tracking number included
#2 [SOLD]
On this one, i tried to achieve aged look. Bevels are hand polished with 1000 grit and etched in FC. Flats are left "brute de forge"
Antler is treated with Potassium permanganate to make it look older. Soft pieces of antler are sealed with epoxy resin.
I used red vulkanfiber as liner material. Pins are hammered.
Details:
Overall length - 7,24"
Blade length - 3,14"
Blade width - 0,86"
Thickness at the back of the spine - 1/8"
Tang is tapered to 3/64"
Knife itself weights 3 oz, and with sheath is 5,4 oz
Handmade 4mm thick (0,16") vegetable leather sheath.
Asking SOLD, priority shipping with tracking number included
You can PM/email me: seckardalibor@gmail.com
PayPal ( seckardalibor@gmail.com ) accepted.
Thanks for looking.
Dalibor.
Last edited:
