I call this one my Zombie Back-up Blade. This is not your primary zombie killing blade; that would be a big chopper with a 10-12" blade. This blade is small enough to carry on your belt at all times so if you are away from the group, say answering the call of nature, and that one "Walker" sneaks up on you, you can dispatch him with your Zombie Back-up. I've got 2 for sale. Both are Aldo's 1084 about 3/16" thick at the spine with G10 scales and stainless hardware. Heat treat was by maker in a propane forge and triple tempered.
This one is about 60% forged and 40% stock removal. Edge quenched with visible quench line. Blade is hand sanded to 800 grit and etched in ferrric chloride.
Steel: Aldo's 1084, flat ground
OAL: 9 1/2"
Blade: 4 1/2" tip to scales
Scales: toxic green and black G10 over black G10 liners
Pins: 3 stainless pins of thick-wall 1/4" tubing and 1 thong tube
Sheath: distressed leather, died black and hot-waxed, 8-9 oz.
Extras: Tapered tang, forged finish on the flats.
Price: $110 shipped CONUS
I tried to get a hamon on this one but all of the satanite popped off during the quench; there is a faint line on each side but it isn't a true hamon. Blade was hand sanded to 2000 grit and etched with ferric chloride.
Steel: Aldo's 1084, flat ground
OAL: 9 1/2"
Blade: 4 1/2" tip to scales
Scales: jade green G10 over black G10 liners
Pins: 3 stainless pins of thick-wall 1/4" tubing and 1 thong tube
Sheath: distressed leather, 2-tone tan and mahogany died, 8-9 oz.
Extras: Tapered tang, forged finish on the flats.
Price: $110 shipped CONUS Sold
I accept PayPal or USPS money orders (PayPal preferred) CONUS Shipping is included. Other shipping is available, contact me for an estimate first and buyer assumes all liability for overseas shipping. PayPal Address is rwnance1@windstream.net. If you are not satisfied with your purchase, please return the item unused within 7 days for a full refund.
Any questions, either PM here or email me at rwnance1@windstream.net and i will reply within 12 hours.
thanks for looking
randy
This one is about 60% forged and 40% stock removal. Edge quenched with visible quench line. Blade is hand sanded to 800 grit and etched in ferrric chloride.
Steel: Aldo's 1084, flat ground
OAL: 9 1/2"
Blade: 4 1/2" tip to scales
Scales: toxic green and black G10 over black G10 liners
Pins: 3 stainless pins of thick-wall 1/4" tubing and 1 thong tube
Sheath: distressed leather, died black and hot-waxed, 8-9 oz.
Extras: Tapered tang, forged finish on the flats.
Price: $110 shipped CONUS
I tried to get a hamon on this one but all of the satanite popped off during the quench; there is a faint line on each side but it isn't a true hamon. Blade was hand sanded to 2000 grit and etched with ferric chloride.
Steel: Aldo's 1084, flat ground
OAL: 9 1/2"
Blade: 4 1/2" tip to scales
Scales: jade green G10 over black G10 liners
Pins: 3 stainless pins of thick-wall 1/4" tubing and 1 thong tube
Sheath: distressed leather, 2-tone tan and mahogany died, 8-9 oz.
Extras: Tapered tang, forged finish on the flats.
Price: $110 shipped CONUS Sold
I accept PayPal or USPS money orders (PayPal preferred) CONUS Shipping is included. Other shipping is available, contact me for an estimate first and buyer assumes all liability for overseas shipping. PayPal Address is rwnance1@windstream.net. If you are not satisfied with your purchase, please return the item unused within 7 days for a full refund.
Any questions, either PM here or email me at rwnance1@windstream.net and i will reply within 12 hours.
thanks for looking
randy
Last edited: