Not only are these 2 knives unique in style, they both have an interesting story behind them. Interesting to me at least 
#1
.07" AEBL
Hardened to 61rc with sub zero treatment.
This blade I made sort of on a whim. It was initially going into my scrap stainless bucket, as it was a cut off from a large Santoku I made. But I took a quick look at it and thought, that I could make something from this.
So this is the outcome. Kind of like an old school cheese cutting blade, or could also pass as a small clever.
The cutting edge itself is 2 1/2". The OAL is 8 1/8".
The blade was rough buffed and polished with a short convex grind.
As this was a cutoff scrap, and was already hardened, there are no drilled holes. So it is a solid piece with wrapped paracord. I dont really do much paracord wrapping but, I knew I had to do something to keep it from sliding off so I soaked in epoxy. A little glossier than I'd like but, none the less is very sturdy.
Asking $35 shipped to the 50 states. These do not include sheaths, but if you would like, I can make a flat, 2 piece pancake style kydex sheath for either of these, (Large Tek-Lok Compatible) for $20 extra. A few colors are available. Message me if interested.
PAYPAL to sarabonifas@yahoo.com. Contact me if you have other payment options in mind.
CONTACT me at colu41 @ gmail
#2
.07" AEBL
Hardened to 61rc with sub zero treatment.
Now this one, was from the same batch of steel as #1 from awhile back. This is actually the knife that nearly cut my finger off last year. Being fairly new to the buffer, the very thin edge of this thing caught the wheel, and tore into my pointer finger. Luckily I was able to take the pad of the finger and flop it back up for stitches but, was still pretty gruesome. After that I tossed the blade and already cut handle material in a drawer. Finally 7 or 8 months later I decided to finish it.
Cutting edge is 2 1/2". OAL is 5 5/8".
Blade has a very thin convex edged grind, with a buffed and lightly stonewashed finish. Perfect for edc.
Handles are Gray & Black G10, micarta pins, with a 1/4" lanyard hole at the end.
Asking SOLD shipped to the 50 states.
Payment and contact info same as above.
#1
.07" AEBL
Hardened to 61rc with sub zero treatment.
This blade I made sort of on a whim. It was initially going into my scrap stainless bucket, as it was a cut off from a large Santoku I made. But I took a quick look at it and thought, that I could make something from this.
So this is the outcome. Kind of like an old school cheese cutting blade, or could also pass as a small clever.
The cutting edge itself is 2 1/2". The OAL is 8 1/8".
The blade was rough buffed and polished with a short convex grind.
As this was a cutoff scrap, and was already hardened, there are no drilled holes. So it is a solid piece with wrapped paracord. I dont really do much paracord wrapping but, I knew I had to do something to keep it from sliding off so I soaked in epoxy. A little glossier than I'd like but, none the less is very sturdy.
Asking $35 shipped to the 50 states. These do not include sheaths, but if you would like, I can make a flat, 2 piece pancake style kydex sheath for either of these, (Large Tek-Lok Compatible) for $20 extra. A few colors are available. Message me if interested.
PAYPAL to sarabonifas@yahoo.com. Contact me if you have other payment options in mind.
CONTACT me at colu41 @ gmail
#2
.07" AEBL
Hardened to 61rc with sub zero treatment.
Now this one, was from the same batch of steel as #1 from awhile back. This is actually the knife that nearly cut my finger off last year. Being fairly new to the buffer, the very thin edge of this thing caught the wheel, and tore into my pointer finger. Luckily I was able to take the pad of the finger and flop it back up for stitches but, was still pretty gruesome. After that I tossed the blade and already cut handle material in a drawer. Finally 7 or 8 months later I decided to finish it.
Cutting edge is 2 1/2". OAL is 5 5/8".
Blade has a very thin convex edged grind, with a buffed and lightly stonewashed finish. Perfect for edc.
Handles are Gray & Black G10, micarta pins, with a 1/4" lanyard hole at the end.
Asking SOLD shipped to the 50 states.
Payment and contact info same as above.
Last edited: