2017 Hinder/Triple Aught Design 3" XM18 Spanto

d2eux

Basic Member
Feedback: +1 / =0 / -0
Joined
Oct 10, 2010
Messages
289
Used, but still has solid lockup and has been well sharpened for cutting tasks.
Cut Test
https://imgur.com/a/WAHYdRg

Hardware (Pivot screw, standoffs, lockbar stabilizer, and chicago screws) was originally stainless steel, but was swapped out for Hinderer bronze anodized titanium parts. Also, swapped out philips head screws on pocket clip for anodized blue torx screws.

Teflon washers were also switched out for phosphor bronze washers. I will be including all of the original hardware and washers so you can switch back, if you choose (see last picture).

Both G10 and Titanium scales are laser etched/engraved to resemble topographical lines on a map.

Some notes:
>You will notice some scuff marks on the tumbled finish blade and tip. Also, on anodized bronze titanium lockbar stabilizer, and pivot screw.
>Titanium lockbar moves inward with heavy cutting (e.g. blade makes contact against wood or cutting board).

Asking $SOLD including shipping. Accept Paypal, check or money order.

I have been an ebay seller since 2000 with 100% positive feedback. Here is my seller profile.
https://www.ebay.com/usr/xsforsale

Thanks for looking!

IMG_2606.JPG IMG_2613.JPG IMG_2612.JPG IMG_2611.JPG IMG_2617.JPG IMG_2616.JPG IMG_2614.JPG IMG_2615.JPG IMG_2610.JPG IMG_2608.JPG
 
Last edited:
Back
Top