25% off all in stock Polk Knives! - new knives added

gdpolk

gdpolk

Feedback: +2 / =0 / -0
Joined
Sep 19, 2011
Messages
461
I'm looking at moving a few blades to pick up some more materials for the shop. PM me if interested. As with all of my sales, a minimum of 10% will go to the kids at St. Jude's Children's Hospital. Photos to follow in the posts below...
  • Small Game Hunter, AEBL steel, Arizona desert ironwood
    • $270 retail, on sell for $203 shipped/insured
  • Crappie Filet, AEBL steel, Shadetree Drunken Coffee Bag micarta
    • $265 retail, on sell for $199 shipped/insured
  • Small Game Hunter, AEBL steel, Shadetree Evergreen micarta
    • $260 retail, on sell for $195 shipped/insured
  • Woodsman, 3V steel, Shadetree Emerald micarta
    • $410 retail, on sell for $308 shipped/insured
  • Woodsman 3V steel, stabilized Turkish walnut
    • $430 retail, on sell for $323 shipped/insured
  • Trailing Point Skinner, AEBL, maroon linen micarta
    • $215 retail, on sell for $162 shipped/insured
  • Small Game Hunter, AEBL, tulipwood, double mosaic pins
    • $260 retail, on sell for $195 shipped/insured
  • Small Game Hunter, AEBL, black canvas, double mosaic pins
    • $235 retail, on sell for $177 shipped/insured
  • Small Game Hunter, AEBL, stabilized buckeye burl, canvas pins
    • $250 retail, on sell for $188 shipped/insured
  • Mini Woodlore, AEBL, hollow ground, black canvas over yellow liners, mosaic pin
    • $260 retail, on sell for $195 shipped/insured
 
  • $200 – 6.5″ Crappie Filet in 1/10" AEB-L steel at 61 HRC, partial height hollow ground with convexed secondary bevel and wicked sharp for a fine edge but a sturdy spine
  • $25 – Shadetree Custom Drunken Coffee Bag scales upgrade
  • $25 – Kydex sheath with drain hole silhouetting blade tip – hole spacing set up for Tek-Lock/Combat Loop hardware to be ran vertically, horizontally, canted, or inverted
  • add optional Combat Loop hardware for additional $15
  • $15 – USPS Priority Shipping (2-3 days) with insurance anywhere legal in the US
  • $265 Total cost, on sale for $199 Shipped/Insured
  • Free Bible available upon request with any knife order
  • As with all knife sells, a minimum of 10% will go to St. Jude's Children's Hospital.

Crappie Filet...
crappie-filet-aebl-shadetree-dcb-jpg.725217

Included sheath...
crappie-filet-aebl-shadetree-dcb-kydex-jpg.725218
 
This knife is designed to excel at skinning and quartering animals. Its size and proportions are made for those who like to maintain controlled cuts through the flesh and keep every bit of meat possible. The geometry of the blade is optimized to work well in small game, while still being large enough to be efficient in medium game. The handle is optimal for use in a modified saber grip with the thumb along the side and in a choked up grip with the index finger along the spine. The handle profile is left thin with minimal contouring to allow it to fit in a smaller grip as well as to provide increased feedback about the knife’s position while in the chest cavity of medium sized game. The spine of the knife is squared with a slightly chamfered edge to allow for tactile feedback without risk of tearing your latex gloves when cleaning game animals.

Specifications:
  • Overall Length: 7.5”
  • Blade Length: 3.25”
  • Height: 1”
  • Grind: Hollow
  • Steel: 0.115” AEB-L steel at 61 HRC
  • Handle: Shadetree Customs’s Evergreen micarta with tan/green G10 liners
  • Hardware: ¼” Canvas micarta pins
Pricing:
  • $200 - base cost of Small Game Hunter (canvas micarta and simple pins)
  • $25 - Shadetree Customs Evergreen micarta upgrade
  • $20 - Tan/Green G10 liners ($10/each)
  • $15 – USPS Priority Shipping (2-3 days) with insurance anywhere legal in the US
  • sheath optional upon request ($25 base cost on kydex or $50 base cost on custom leather)
  • $260 Shipped/Insured total cost, on sale for $195 shipped/insured
  • Free Bible available upon request with any knife order
  • As with all knife sells, a minimum of 10% will go to St. Jude's Children's Hospital.
It slices well...https://www.instagram.com/p/Bu7YKCZBxND/

small-game-hunter-7-outside-jpg.691845

small-game-hunter-7-outside-in-hand-jpg.691846


 
Woodsman:
This knife is designed to serve as the ideal, general-purpose outdoorsman's knife. It is my most versatile knife design. The blade profile has a large, gentle sweep along the belly to work well in food preparation and cleaning game animals. The blade is given a distal taper to improve precision and slicing along the tip and strength closer to the handle. In order to reduce weight, the tang of the knife is skeletonized to the maximum amount possible without sacrificing durability. The handle geometry is optimized to be comfortable and secure in a saber, modified saber, reverse, and choked up grips. The butt of the handle is rounded to allow for a comfortable area to strike with the palm of your hand when stabbing or creating split wood fires. The size and contours of the handle should allow a loose, yet powerful, grip with no sharp corners or hot spots to reduce hand fatigue over extended periods of heavy use.

Specifications:
Overall Length: 9"
Blade Length: 4.125" with distal taper and skeletonized tang
Height: 1.25"
Steel: CPM3V
Handle: black canvas bolster and Shadetree custom's Evergreen micarta, white spacers, black liners, and carbon fiber pins/lanyard tube
Sheath: custom fit, black leather sheath with border tooling from A-grade Harmon Oak vegetable tanned leather

  • $275 – Woodsman in CPM 3V Steel
  • $25 – Shadetree Custom Evergreen Micarta Upgrade
  • $25 – Bolster
  • $20 – Double Liners and spacer at bolster
  • $50 – Custom fit leather sheath, border tooling free
  • $15 – USPS Priority Shipping (2-3 days) with insurance within the US where legal
  • $410 Total - 25% off, now $308 shipped insured
  • Free Bible available upon request with any knife order
  • As with all knife sells, a minimum of 10% will go to St. Jude's Children's Hospital.

More photos may be available on my Instagram: https://www.instagram.com/g_polk_knives/

img_0858-jpg.595112
img_0859-jpg.595113
screen-shot-2018-09-16-at-1-10-54-pm-png.595114
screen-shot-2018-09-16-at-1-11-02-pm-png.595115


 
Woodsman:
This knife is designed to serve as the ideal, general-purpose outdoorsman's knife. It is my most versatile knife design. The blade profile has a large, gentle sweep along the belly to work well in food preparation and cleaning game animals. The blade is given a distal taper to improve precision and slicing along the tip and strength closer to the handle. In order to reduce weight, the tang of the knife is skeletonized to the maximum amount possible without sacrificing durability. The handle geometry is optimized to be comfortable and secure in a saber, modified saber, reverse, and choked up grips. The butt of the handle is rounded to allow for a comfortable area to strike with the palm of your hand when stabbing or creating split wood fires. The size and contours of the handle should allow a loose, yet powerful, grip with no sharp corners or hot spots to reduce hand fatigue over extended periods of heavy use.

Specifications:
Overall Length: 9"
Blade Length: 4.125" with distal taper and skeletonized tang
Height: 1.25"
Steel: CPM3V
Handle: stabilized fiddleback Turkish walnut that I had shipped in from Istanbul, a large loveless bolt, a matching mosaic lanyard tube, and OD green and black liners
Sheath: custom fit, black leather sheath with border tooling from A-grade Harmon Oak vegetable tanned leather

Pricing for this one is $365 shipped/insured anywhere legal in the US via USPS Priority or up to $15 of shipping costs for non-domestic orders. I can take checks, cash, or cards. Certain trade offers may be considered. Also I can include a free Bible with any order upon request.

  • $275 – Woodsman in CPM 3V Steel
  • $45 – Stabilized Turkish Walnut shipped in from Istanbul, Turkey
  • $5 – Loveless Bolt
  • $20 – Mosaic Lanyard Tube
  • $20 – Double liners
  • $50 – Custom fit sheath, border tooling free
  • $15 – USPS Priority Shipping (2-3 days) with insurance anywhere legal in the US
  • $430 Total cost - 25% off, now $323 shipped/insured
  • Free Bible available upon request with any knife order
  • As with all knife sells, a minimum of 10% will go to St. Jude's Children's Hospital.

More photos may be available on my Instagram: https://www.instagram.com/g_polk_knives/

img_0850-jpg.595108
img_0851-jpg.595109
screen-shot-2018-09-16-at-1-08-00-pm-png.595110
screen-shot-2018-09-16-at-1-08-09-pm-png.595111


 
This knife is designed to excel at skinning and quartering animals. Its size and proportions are made for those who like to maintain controlled cuts through the flesh and keep every bit of meat possible. The geometry of the blade is optimized to work well in small game, while still being large enough to be efficient in medium game. The handle is optimal for use in a modified saber grip with the thumb along the side and in a choked up grip with the index finger along the spine. The handle profile is left thin with minimal contouring to allow it to fit in a smaller grip as well as to provide increased feedback about the knife’s position while in the chest cavity of medium sized game. The spine of the knife is squared with a slightly chamfered edge to allow for tactile feedback without risk of tearing your latex gloves when cleaning game animals.

Specifications:
  • Overall Length: 7.5”
  • Blade Length: 3.25”
  • Height: 1”
  • Grind: hollow
  • Steel: AEBL at 61 HRC
  • Handle: Arizona desert ironwood over yellow liners
  • Hardware: 1/8” brass pins
Pricing:
  • $200 - base cost of Small Game Hunter (canvas micarta and simple pins)
  • $45 - Arizona desert ironwood upgrade
  • $10 - thin yellow Vulcanized fiber liners
  • $0 - brass pins for hardware
  • $15 – USPS Priority Shipping (2-3 days) with insurance anywhere legal in the US
  • sheath optional upon request ($25 base cost on kydex or $50 base cost on custom leather)
  • $270 Shipped/Insured total cost, on sale for $203 Shipped/Insured total cost!
  • Free Bible available upon request with any knife order
  • As with all knife sells, a minimum of 10% will go to St. Jude's Children's Hospital.
IMG_E3107.jpg

IMG_E3108.jpg

IMG_E3109.jpg

IMG_3111.jpg

IMG_3110.jpg



 
I just finished this one up today, but the sale applies as well until I reach the financial goal for the next batch...

This knife is designed to excel at skinning and quartering animals. Its size and proportions are made for those who like to maintain controlled cuts through the flesh and keep every bit of meat possible. The geometry of the blade is optimized to work well in small game, while still being large enough to be efficient in medium game. The handle is optimal for use in a modified saber grip with the thumb along the side and in a choked up grip with the index finger along the spine. The handle profile is left thin with minimal contouring to allow it to fit in a smaller grip as well as to provide increased feedback about the knife’s position while in the chest cavity of medium sized game. The spine of the knife is squared with a slightly chamfered edge to allow for tactile feedback without risk of tearing your latex gloves when cleaning game animals.

Specifications:
  • Overall Length: 7.5”
  • Blade Length: 3.25”
  • Height: 1”
  • Grind: hollow
  • Steel: AEBL at 61 HRC
  • Handle: tulipwood
  • Hardware: 1/4” mosaic pins
Pricing:
  • $200 - base cost of Small Game Hunter
  • $25 - tulipwood handles upgrade
  • $20 - mosaic pins
  • $15 – USPS Priority Shipping (2-3 days) with insurance anywhere legal in the US
  • sheath optional upon request ($25 base cost on kydex or $50 base cost on custom leather)
  • $260 Shipped/Insured total cost, on sale for $195 Shipped/Insured total cost!
  • Free Bible available upon request with any knife order
  • As with all knife sells, a minimum of 10% will go to St. Jude's Children's Hospital.

12fc9951-7ff7-415e-9e2c-589fb40178c6.jpg



 
I just finished this one up today, but the sale applies as well until I reach the financial goal for the next batch...

This knife is designed to excel at skinning and quartering animals. Its size and proportions are made for those who like to maintain controlled cuts through the flesh and keep every bit of meat possible. The geometry of the blade is optimized to work well in small game, while still being large enough to be efficient in medium game. The handle is optimal for use in a modified saber grip with the thumb along the side and in a choked up grip with the index finger along the spine. The handle profile is left thin with minimal contouring to allow it to fit in a smaller grip as well as to provide increased feedback about the knife’s position while in the chest cavity of medium sized game. The spine of the knife is squared with a slightly chamfered edge to allow for tactile feedback without risk of tearing your latex gloves when cleaning game animals.

Specifications:
  • Overall Length: 7.5”
  • Blade Length: 3.25”
  • Height: 1”
  • Grind: hollow
  • Steel: AEBL at 61 HRC
  • Handle: black canvas micarta
  • Hardware: 1/4” mosaic pins
Pricing:
  • $200 - base cost of Small Game Hunter
  • $20 - mosaic pins
  • $15 – USPS Priority Shipping (2-3 days) with insurance anywhere legal in the US
  • sheath optional upon request ($25 base cost on kydex or $50 base cost on custom leather)
  • $235 Shipped/Insured total cost, on sale for $177 Shipped/Insured total cost!
  • Free Bible available upon request with any knife order
  • As with all knife sells, a minimum of 10% will go to St. Jude's Children's Hospital.

3feb5231-7325-41b4-84df-a39ce4f32818.jpg



 
I just finished this one up today, but the sale applies as well until I reach the financial goal for the next batch...

This knife is designed to excel at skinning and quartering animals. Its size and proportions are made for those who like to maintain controlled cuts through the flesh and keep every bit of meat possible. The geometry of the blade is optimized to work well in small game, while still being large enough to be efficient in medium game. The handle is optimal for use in a modified saber grip with the thumb along the side and in a choked up grip with the index finger along the spine. The handle profile is left thin with minimal contouring to allow it to fit in a smaller grip as well as to provide increased feedback about the knife’s position while in the chest cavity of medium sized game. The spine of the knife is squared with a slightly chamfered edge to allow for tactile feedback without risk of tearing your latex gloves when cleaning game animals.

Specifications:
  • Overall Length: 7.5”
  • Blade Length: 3.25”
  • Height: 1”
  • Grind: hollow
  • Steel: AEBL at 61 HRC
  • Handle: stabilized buckeye burl
  • Hardware: 1/4” mosaic pins
Pricing:
  • $200 - base cost of Small Game Hunter
  • $35 - stabilized buckeye burl
  • $15 – USPS Priority Shipping (2-3 days) with insurance anywhere legal in the US
  • sheath optional upon request ($25 base cost on kydex or $50 base cost on custom leather)
  • $250 Shipped/Insured total cost, on sale for $188 Shipped/Insured total cost!
  • Free Bible available upon request with any knife order
  • As with all knife sells, a minimum of 10% will go to St. Jude's Children's Hospital.

df9752db-0145-4c9c-853f-f1c4ede2a994.jpg



 
I just finished this one up today, but the sale applies as well until I reach the financial goal for the next batch...

A 3.5" hollow ground skinner with anatomical handle based off of my Mini Woodlore pattern. This model is 8.5″ in overall length with a 3.5″ blade length.

Specifications:
  • Overall Length: 8.5”
  • Blade Length: 3.5”
  • Height: 1”
  • Grind: hollow
  • Steel: AEBL at 61 HRC
  • Handle: black canvas micarta over yellow liners
  • Hardware: 1/8” mosaic pin and 1/4" brass tube
Pricing:
  • $225 - base cost of Mini Woodlore
  • $10 - yellow liners
  • $10 - mosaic pins
  • $15 – USPS Priority Shipping (2-3 days) with insurance anywhere legal in the US
  • sheath optional upon request ($25 base cost on kydex or $50 base cost on custom leather)
  • $260 Shipped/Insured total cost, on sale for $195 Shipped/Insured total cost!
  • Free Bible available upon request with any knife order
  • As with all knife sells, a minimum of 10% will go to St. Jude's Children's Hospital.

fabc1011-894e-4956-b43f-2897eb9fded3.jpg
 
I just finished this one up today, but the sale applies as well until I reach the financial goal for the next batch...

A 4" hollow ground trailing point skinner. This one is thin and cuts like an absolute lazer.

Specifications:
  • Blade Length: 4”
  • Height: 1”
  • Grind: hollow
  • Steel: AEBL at 61 HRC
  • Handle: maroon linen micarta
  • Hardware: 1/8” brass pins
Pricing:
  • $200 - base cost
  • $15 – USPS Priority Shipping (2-3 days) with insurance anywhere legal in the US
  • sheath optional upon request ($25 base cost on kydex or $50 base cost on custom leather)
  • $215 Shipped/Insured total cost, on sale for $162 Shipped/Insured total cost!
  • Free Bible available upon request with any knife order
  • As with all knife sells, a minimum of 10% will go to St. Jude's Children's Hospital.

96b6fa7e-d8f6-4ff7-9c26-5480826815d6.jpg

df93d223-3ebd-4d34-906b-c8c8790c20c6.jpg
 
gdpolk said:
Woodsman:
This knife is designed to serve as the ideal, general-purpose outdoorsman's knife. It is my most versatile knife design. The blade profile has a large, gentle sweep along the belly to work well in food preparation and cleaning game animals. The blade is given a distal taper to improve precision and slicing along the tip and strength closer to the handle. In order to reduce weight, the tang of the knife is skeletonized to the maximum amount possible without sacrificing durability. The handle geometry is optimized to be comfortable and secure in a saber, modified saber, reverse, and choked up grips. The butt of the handle is rounded to allow for a comfortable area to strike with the palm of your hand when stabbing or creating split wood fires. The size and contours of the handle should allow a loose, yet powerful, grip with no sharp corners or hot spots to reduce hand fatigue over extended periods of heavy use.

Specifications:
Overall Length: 9"
Blade Length: 4.125" with distal taper and skeletonized tang
Height: 1.25"
Steel: CPM3V
Handle: stabilized fiddleback Turkish walnut that I had shipped in from Istanbul, a large loveless bolt, a matching mosaic lanyard tube, and OD green and black liners
Sheath: custom fit, black leather sheath with border tooling from A-grade Harmon Oak vegetable tanned leather

Pricing for this one is $365 shipped/insured anywhere legal in the US via USPS Priority or up to $15 of shipping costs for non-domestic orders. I can take checks, cash, or cards. Certain trade offers may be considered. Also I can include a free Bible with any order upon request.

  • $275 – Woodsman in CPM 3V Steel
  • $45 – Stabilized Turkish Walnut shipped in from Istanbul, Turkey
  • $5 – Loveless Bolt
  • $20 – Mosaic Lanyard Tube
  • $20 – Double liners
  • $50 – Custom fit sheath, border tooling free
  • $15 – USPS Priority Shipping (2-3 days) with insurance anywhere legal in the US
  • $430 Total cost - 25% off, now $323 shipped/insured
  • Free Bible available upon request with any knife order
  • As with all knife sells, a minimum of 10% will go to St. Jude's Children's Hospital.

More photos may be available on my Instagram: https://www.instagram.com/g_polk_knives/

img_0850-jpg.595108
img_0851-jpg.595109
screen-shot-2018-09-16-at-1-08-00-pm-png.595110
screen-shot-2018-09-16-at-1-08-09-pm-png.595111


Click to expand...
What is the Hrc on your woodsman 3v blades?
 
You must log in or register to reply here.
Back
Top