2x EDC knives

Tony Mont

Tony Mont

Knifemaker / Craftsman / Service Provider
Feedback: +93 / =0 / -0
Joined
Apr 15, 2018
Messages
1,532
A little repost for a couple of EDC knives. Simple design with a handle construction that's bulletproof. The soaked hemp over oak makes it imposible for the scales to pop off. Perfect for hard use.

Steel: 8670
Handle: hemp over oak

Dimensions:
Overall lenght: 18cm - 7.08''
Blade lenght: 7 cm - 2.75''
Blade widht: 2.8 cm - 1.10''
Blade thickness: 3 mm - 0.118''
Handle lenght: 10.5 cm - 4.13''

Full flat grind with an antiqued finish. The handles have been torched and soak in glue since I took the pictures. I can take more pictures upon request.

It comes with a dark brown leather sheath and a belt loop. The sheath is not ready yet, you can choose for either left or right side carry.

Price: 100$ per knife (top and middle one sold, bottom one available)
Free international shipping with priority mail and a tracking number.
Via PayPal. DO NOT MENTION THE WORDS KNIFE/BLADE OR SIMILAR IN THE PAYPAL COMMENTS!

View attachment 1635418

Thanks for looking!
Tony.
 
Last edited:
So the handles are glued? Then wrapped in hemp. Cool design for handy EDC. Nicely done.
 
cbach8tw said:
So the handles are glued? Then wrapped in hemp. Cool design for handy EDC. Nicely done.
Click to expand...
The handles are attached same way as any full tang knife (epoxy+pins). Once completely shaped, I wrap them in hemp which is soaked in glue and becomes rock solid.
The soaked hemp provides a mechanical bond that it's pretty much impossible to take off.
 
Tony Mont said:
The handles are attached same way as any full tang knife (epoxy+pins). Once completely shaped, I wrap them in hemp which is soaked in glue and becomes rock solid.
The soaked hemp provides a mechanical bond that it's pretty much impossible to take off.
Click to expand...

thanks, I was wondering if there were pins too. Appreciate the info, cool edc.
 
You must log in or register to reply here.
Back
Top