- Joined
- Jun 15, 2018
- Messages
- 230
3 for sale - Payment must be paypal F&F and shipping will be to the US only. No exceptions.
1. David Sharp JAK - This is an older one, measures about 6 7/8" overall, runs on washers. Solid little knife with two faults, one is some light lock stick, nothing too bad. The action however is awful, to the point where you can't deploy it fully with the flipper. It opens fine 2 handed and locks up well, but don't expect to get much out of the flipper. Its probably fixable, or you could grind off the tab and add a thumb disk or nail nick to make it something unique (I planned to do this at one point but never got it done). SOLD
2. Clyde Challenor Scorpion - Gently used but in good condition, there are some trails on the handle and blade but the stonewashed finish makes them hard to see. There is a faint amount of blade play that might be fixable but it doesn't affect the lockup. Measures about 7.25" overall. SOLD
3. Plunkett Blade Works Harpoon - Nice folder from a newer maker, TI scales and hand rubbed M390 on washers. Not a perfect piece, I had to take it apart to clean it and fix the centering, its fine now but still off by a hair if you look closely. Also a light spot on the lockside where the clip rubbed against the frame. Detent is on the strong side, lockup is solid and no play or lock stick. Comes with COA. Measures just over 7.50" overall length. $250
1. David Sharp JAK - This is an older one, measures about 6 7/8" overall, runs on washers. Solid little knife with two faults, one is some light lock stick, nothing too bad. The action however is awful, to the point where you can't deploy it fully with the flipper. It opens fine 2 handed and locks up well, but don't expect to get much out of the flipper. Its probably fixable, or you could grind off the tab and add a thumb disk or nail nick to make it something unique (I planned to do this at one point but never got it done). SOLD
2. Clyde Challenor Scorpion - Gently used but in good condition, there are some trails on the handle and blade but the stonewashed finish makes them hard to see. There is a faint amount of blade play that might be fixable but it doesn't affect the lockup. Measures about 7.25" overall. SOLD
3. Plunkett Blade Works Harpoon - Nice folder from a newer maker, TI scales and hand rubbed M390 on washers. Not a perfect piece, I had to take it apart to clean it and fix the centering, its fine now but still off by a hair if you look closely. Also a light spot on the lockside where the clip rubbed against the frame. Detent is on the strong side, lockup is solid and no play or lock stick. Comes with COA. Measures just over 7.50" overall length. $250
Last edited:
