3 EDCs, 1095 and ATS-34

Feedback: +119 / =0 / -0
Joined
Feb 1, 2010
Messages
1,312
SPECS

Number 1 Nessmuk
1/8 inch thick ATS-34 stainless steel hardened to approximately 60Rc.

Handle is coyote brown paracord wrapped onto knife's full tang.

Blade Length is 3 inches from tip to wrap.

Overall Length about 7.3 inches

Coyote Brown Kydex sheath (shown) with holes spaced for either large or small Tek-lok

Price is $45 plus $7 shipping in US

Number 2 Squall Nessmuk
3.16 inch thick 1095 high carbon steel differentially heat treated with edge at 59-60Rc, tip at approx 55Rc and spine in high 40s Rc.

Handle is brown sea snake skin with coyote brown gutted paracord overwrapped in the traditional interlocking manner showing the snake skin though diamonds.

Blade Length is 3 inches from tip to wrap.

Overall Length about 6.2 inches

Coyote Brown Kydex sheath (shown) set up for either large or small Tek-Loc

SOLD Price is $40 plus $7 shipping in US


Number 3 Nessmuk
1/8 inch thick 1095 high carbon steel deferentially heat treated with edge at 59-60 Rc, tip at approx 55Rc and spine in high 40s Rc.

Handle is Coyote brown paracord wrapped onto knife's full tang. Under the wrap is sealed with Loctite Blackmax.

Blade Length is 2.5 inches from tip to wrap .

Overall Length about 7.2 inches

Coyote Brown Kydex sheath (shown) with holes spaced for large and small Tek-lok

SOLD Price is $35 plus $7 shipping in US

I take PayPay (my account is kelley_ward2@agilent.com), major credit cards over the phone (707-479-2530), money orders and checks.
Thanks,
Kelley Ward
Hard Edge Knives
IMG_0814.jpg
 
Last edited:
Hello myold71, thanks for taking Nessmuk #3, I've received the payment marked it SOLD and will get the knife in the mail tomorrow.

and also Thanks Insipid Moniker and baylea I appreciate your compliments.

Kelley
 
Hello Iowa Buck, Thanks for taking the Nessmuk #2, I've marked the blade sold, got the payment and will have the knife in the mail tomorrow. I'm still working on your Tanto with the compound grind. Kelley
 
Hello Iowa Buck, Thanks for taking the Nessmuk #2, I've marked the blade sold, got the payment and will have the knife in the mail tomorrow. I'm still working on your Tanto with the compound grind. Kelley

Thanks Kelley! PM sent to see if you just want to ship both knives together. BTW- can you confirm the blade thickness of the Squall Nessmuk, I think you did a typo on the OP. :D
 
Last edited:
Back
Top